Shopping.co.uk

Belaco Ptc Tower Heater - 2000W - Remote - 12H Timer

Not AvailableBelaco Ptc Tower Heater - 2000W - Remote - 12H Timer

Belaco New PTC Heater, Digital Display with Remote Control, 12H Timer, Electric Heater Oscillating...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Belaco Ptc Tower Heater is designed for individuals seeking rapid and portable heating solutions for home or office spaces. Its key benefit is providing immediate warmth with a user-friendly digital interface and remote control. A potential caveat is its requirement for a separate power socket for optimal and safe operation, given its 2000W power output.

All features

BrandBelaco

Extended Product Information

FAQs

How quickly does this heater start producing heat?

The Belaco Ptc Tower Heater uses PTC ceramic technology, which provides heat almost immediately after being turned on.

Can I use this heater in a large room?

This heater is effective for medium-sized rooms. For very large spaces, you may need multiple units or a higher-wattage heater.

Is it safe to leave the heater on overnight?

While the heater has a 12-hour timer for automatic shut-off, it is always recommended to use caution when leaving heating appliances unattended. Ensure the safety features are functioning correctly and the unit is not obstructed.

What is the wattage of this heater?

The heater has two settings: 1000W and 2000W.

Does the heater require a special outlet?

For the 2000W setting, it is highly recommended to use a separate power distribution socket that meets the specifications outlined in the manual to prevent overloading or fire hazards. Avoid using multiple devices on the same circuit.

How do I clean the heater?

Unplug the heater and ensure it is cool. Wipe the exterior with a soft, damp cloth. Avoid using harsh chemicals or immersing the unit in water.

What does the oscillating function do?

The oscillating function allows the heater to rotate side to side, distributing warm air more evenly throughout the room.

Troubleshooting

Heater not turning on

Ensure the power cord is securely plugged into a working outlet. Check if the tip-over switch has been activated; if so, set the heater upright. Verify that the remote control has working batteries.

Weak or no heat output

Check that the heater is set to a heat setting (1000W or 2000W). Ensure the room thermostat is set higher than the current room temperature. Clean any dust or debris from the air intake and outlet vents.

Heater shuts off unexpectedly

The tip-over protection may have been triggered. Ensure the heater is on a stable, level surface. The unit may also have overheated; allow it to cool down before restarting. Check if the timer has been set to shut off.

Remote control not working

Ensure the remote is within the operational range of the heater and there are no obstructions. Replace the batteries in the remote control if they are depleted.

Pros and Cons

Pros

  • Provides heat very quickly.
  • Easy to control with the digital display and remote.
  • Portable and simple to move around.
  • Built-in safety features like tip-over protection.
  • Even heat distribution due to oscillation.

Cons

  • Requires a dedicated power socket due to high wattage.
  • Not recommended to move while in operation.
  • Manual does not specify thermostat accuracy.
  • Filter cleaning instructions are not detailed.

Setup, Compatibility & Care

Setup:

  1. Place the heater on a firm, level surface. Ensure the base is securely attached.
  2. Plug the heater directly into a wall socket. It is recommended to use a dedicated circuit for the 2000W setting to avoid overloading.
  3. Use the control panel or the remote to select your desired heat setting, temperature, and timer function.

Compatibility:

  • This heater is suitable for standard indoor home and office environments.
  • Ensure your home's electrical system can support a 2000W appliance on a single circuit.

Care:

  • Always unplug the heater and allow it to cool completely before cleaning or maintenance.
  • Wipe the exterior with a soft, damp cloth. Do not use abrasive cleaners or immerse the unit in water.
  • Periodically check and clean any dust filters or vents to ensure optimal performance and prevent overheating.