Frenchic Paint - Donkey Derby - Brown


Currently unavailable


Currently unavailable
This guide is for DIY enthusiasts and furniture upcyclers looking for a versatile, easy-to-use paint. The key benefit is its all-in-one nature, requiring no primer or topcoat, and offering a durable finish with minimal prep. A caveat to consider is its specific deep brown hue, which can appear chocolatey or charcoal depending on lighting. Frenchic Paint in Donkey Derby is a water-based chalk and mineral paint with a soft-satin sheen, designed for interior woodwork, furniture, and various surfaces, including laminate and metal, offering a robust, scuff-resistant finish.
| Colour | Brown |
|---|---|
| Model Part Number | 39983680979031 |
| Brand | Frenchic |
No, Frenchic Paint is designed as an all-in-one product, meaning it functions as a primer, paint, and topcoat, simplifying the process.
We recommend two coats for a more durable and even finish, though a single coat may suffice for very light coverage needs on certain surfaces.
Yes, it is suitable for kitchen cupboards, including wood and laminate surfaces, offering a robust and scuff-resistant finish.
A 500ml tin typically covers up to 7m² with a single coat. For the recommended two coats, coverage is approximately 3.5m² per tin.
This paint provides a soft-satin sheen, offering a subtle elegance rather than a high gloss or flat matte appearance.
Clean with a damp cloth. For more stubborn marks, a mild detergent and water solution can be used. Avoid abrasive cleaners.
Yes, Frenchic Paint is EN71-3 certified, making it safe for use on children's toys and furniture.
Stir the paint thoroughly. If still too thick, add a tiny amount of water (a few drops per litre) and mix well. Avoid adding too much water, as this can affect the finish.
Ensure you are using a good quality brush or roller and applying thin, even coats. Apply in consistent strokes. Allow sufficient drying time between coats and ensure the surface was properly prepared.
Check that the surface was clean, dry, and free from any grease or contaminants before painting. Ensure no incompatible finishes (like high-gloss varnish) were present without proper prep.
This can occur if coats were applied too thickly or if drying conditions were poor (high humidity). Ensure adequate ventilation and allow longer drying times. Applying a final thin coat might help seal the surface.
Preparation:
Minimal preparation is required. Ensure the surface is clean, dry, and free from grease or loose material. For most surfaces, no priming is needed.
Application:
Stir the paint thoroughly before use. Apply with a good quality brush or roller. Two coats are recommended for best durability and finish. Allow adequate drying time between coats as per manufacturer's recommendations (typically 1-2 hours).
Compatibility:
This paint is suitable for:
Care:
Clean the painted surface with a damp cloth. For tougher marks, use a mild detergent and water. Avoid abrasive cleaners, which can damage the finish.
Coverage:
A 500ml tin covers approximately 7m² per coat. For the recommended two coats, expect coverage of around 3.5m² per tin.