Dell - DDR4 - 16 GB - DIMM 288-pin - 2133 MHz - Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 16 GB DDR4 memory module is designed for PC and server applications, offering enhanced performance for memory-intensive tasks. It is ideal for users looking to upgrade their systems for smoother multitasking and faster application loading. A potential caveat is its specific DDR4 2133 MHz speed, which must match system requirements. Key features include 16 GB capacity, ECC support for data integrity, and a 288-pin DIMM form factor.
All features
| Colour | Green |
|---|---|
| Model Part Number | A7945660 |
| Brand | DELL |
Extended Product Information
FAQs
What is ECC memory?
ECC (Error-Correcting Code) memory can detect and correct common types of internal data corruption, making it more reliable for servers and critical workstations.
Can I mix this memory with other DDR4 modules?
While mixing DDR4 modules is sometimes possible, it's recommended to use identical modules for optimal performance and stability. If mixing, ensure they have the same speed, timings, and voltage. The system will typically run at the speed of the slowest module.
What is the difference between DDR4 and older RAM types?
DDR4 offers higher speeds, lower voltage (leading to better power efficiency), and increased density compared to DDR3 and earlier RAM generations.
How do I know if my system supports 2133 MHz RAM?
Consult your computer or motherboard manufacturer's specifications. Most systems designed for DDR4 will list the supported RAM speeds, including 2133 MHz.
What does '1 x 16 GB' mean?
It means the module consists of a single 16 GB component, as opposed to multiple smaller chips on one stick, and it is a single stick of RAM totaling 16 GB.
Is this memory upgradeable for larger capacities?
This is a single 16 GB module. You can add more RAM by installing additional compatible modules in available slots, up to your motherboard's maximum supported capacity and speed.
Troubleshooting
System does not boot or beeps with new memory installed
Ensure the memory module is fully seated in the DIMM slot. Verify compatibility with your motherboard. Try reseating the module or testing it in a different compatible slot.
System recognizes less memory than installed
Check BIOS/UEFI settings to ensure all memory is enabled. Verify that the operating system supports the installed memory amount (e.g., 32-bit OS limitations). Ensure the module is correctly seated.
System instability or crashes (e.g., Blue Screen of Death)
Run a memory diagnostic tool (e.g., Windows Memory Diagnostic). Ensure the module is compatible and not overheating. Reseat the module and check for any physical damage.
Pros and Cons
Pros
- Significant capacity boost with 16 GB.
- ECC support improves system reliability.
- DDR4 technology offers good performance.
- Broad compatibility with supported PC and server systems.
Cons
- Specific clock speed (2133 MHz) may not be optimal for all systems.
- Requires a motherboard with compatible DDR4 DIMM slots.
- Single module configuration offers less upgrade flexibility than multiple smaller modules in some scenarios.
Setup, Compatibility & Care
Setup:
- Power off your computer or server and disconnect the power cord.
- Open the computer case or server access panel.
- Locate an available 288-pin DIMM slot. Refer to your system's manual for slot identification.
- Align the notch on the memory module with the notch in the DIMM slot.
- Gently press down on both ends of the module until the retaining clips on the sides snap into place.
- Close the case and reconnect the power cord.
- Power on the system. The BIOS/UEFI should detect the new memory automatically.
Compatibility:
This module is compatible with PC and server systems that support DDR4 SDRAM with a 2133 MHz clock speed and a 288-pin DIMM form factor. It is specifically listed as compatible with various Dell PowerEdge servers and Precision Workstations. Always consult your system's motherboard or manufacturer specifications to confirm compatibility before installation.
Care:
Handle memory modules by their edges to avoid touching the gold contacts. Store modules in anti-static packaging when not in use. Ensure the system is properly grounded before handling components. Do not expose the module to moisture or extreme temperatures.