VEVOR Mini Split Line Set 30.5m - White - JSY-SS-SKU14
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The VEVOR Mini Split Line Set is designed for HVAC professionals and serious DIYers installing mini-split systems, heat pumps, or central air units. With 30.5 meters of high-purity C12200 copper and robust PE+EVA insulation, it ensures peak thermal efficiency and long-term durability. While its professional-grade construction offers exceptional reliability, users should note the significant length and weight, which requires careful handling and planning during installation to prevent kinking or damage to the insulation.
All features
| Colour | White |
|---|---|
| Model Part Number | JSY-SS-SKU14 |
| Brand | VEVOR |
Extended Product Information
FAQs
Is this set compatible with all refrigerant types?
The high-pressure rating of 850 PSI makes this suitable for most modern refrigerants, including R-410A and R-32.
Can I cut this line set to specific lengths?
Yes, you can cut the copper to your required length, though you will need to re-flare the ends using a professional flaring tool.
Is the insulation UV resistant?
Yes, the PE+EVA foam is designed to be durable, but covering exposed sections with line-set covers is recommended for long-term outdoor protection.
Does it come with both the liquid and suction lines?
This product consists of the copper tubing assembly; please ensure your system requirements match the diameter of the lines provided.
What is the purity of the copper used?
The copper is C12200 grade with 99.9% purity.
Troubleshooting
Difficulty unrolling the copper coil.
Lay the coil flat and unroll it gradually in a circular motion rather than pulling the end, which prevents the copper from tangling.
Flare nut connection is leaking.
Check that the flare surface is clean and free of debris; re-tighten to the correct torque using a calibrated torque wrench.
Visible condensation on the exterior of the insulation.
Ensure all joints are fully sealed with high-quality HVAC tape to bridge any gaps between the insulation sections.
Pros and Cons
Pros
- High-purity copper ensures longevity and efficiency.
- Integrated insulation prevents thermal loss and condensation.
- Engineered for high-pressure systems up to 850 PSI.
- Thick-walled construction minimizes the risk of kinks.
- Includes essential mounting hardware like flare nuts and straps.
Cons
- Substantial coil weight requires assistance during transport and unrolling.
- Fixed length may lead to excessive waste if the installation requires much shorter runs.
- Requires professional-grade tube bending tools to maintain optimal flow.
Setup, Compatibility & Care
To ensure proper installation, always uncoil the tubing slowly to avoid creating sharp bends that could compromise the flow. Ensure the flare nut connections are tightened to the manufacturer's specified torque to prevent refrigerant leaks. While the tubing is kink-resistant, use a proper spring-style tube bender when creating 90-degree turns to maintain the interior diameter of the copper. For exterior runs, ensure that the provided weather-resistant straps are applied securely to protect the insulation from UV degradation and environmental wear over time. Regularly inspect the insulation at connection points to ensure it remains sealed against moisture ingress.