Sticks Like Sh*t - Bostik - White
Not Available
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Bostik's Sticks Like Sh*t adhesive, a high-performance grab adhesive suitable for various building materials. It offers superior bond strength and can even be applied to wet surfaces, making it incredibly versatile. However, users should be aware of the 24-hour drying time before applying any load.
All features
| Colour | White |
|---|---|
| Model Part Number | 30813031 |
| Brand | Bostik |
Extended Product Information
FAQs
What surfaces can I use Sticks Like Sh*t on?
It can be used on wood, metal, glass, stone, plastics, polystyrene, concrete, tiles, mirrors, and plasterboard.
Can I use it outdoors?
Yes, it is weatherproof and water-resistant, suitable for both interior and exterior use.
Can I paint over it?
Yes, it can be over painted once fully cured.
What is the drying time?
The drying time is 24 hours.
Is it solvent-free?
Yes, it has a solvent-free formula.
What is the temperature resistance?
It resists temperatures from -40°C to +100°C.
Can I use it on wet surfaces?
Yes, it can be used on damp surfaces.
How much coverage does one tube provide?
A 290ml tube provides approximately 14m of coverage based on a 5mm diameter bead.
Troubleshooting
Adhesive isn't sticking.
Ensure surfaces are clean and free of contaminants. Make sure the adhesive is within its expiry date. Ensure proper application as per the instructions and provide sufficient support if needed. Check for material compatibility.
Slow drying time.
Verify the environmental conditions; extremely low temperatures can slow down the drying process. Ensure adequate ventilation. Check the product's expiry date.
Pros and Cons
Pros
- High bond strength ensures a durable hold.
- Suitable for use on a wide variety of materials.
- Can be used in both interior and exterior applications.
- Bonds to wet surfaces, increasing its usability.
- Resistant to extreme temperatures.
Cons
- Requires a 24-hour drying time before full load.
- Specific application instructions are required for optimal performance.
Setup, Compatibility & Care
Setup
- Ensure surfaces are clean, dry, and free from loose debris.
- Cut the nozzle to the desired bead size.
- Apply the adhesive to one of the surfaces.
- Press the surfaces together firmly.
- Support the bond if necessary, until the adhesive cures.
Compatibility
Sticks Like Sh*t is compatible with a wide range of building materials including wood, metal, glass, stone, plastics, polystyrene, concrete, tiles, mirrors, and plasterboard. It's not designed for use with polyethylene or polypropylene.
Care
- Store the tube in a cool, dry place.
- Avoid direct sunlight.
- Clean up any excess adhesive immediately with a suitable solvent before it cures.