Soil Solvent Weld Branch Tee - Davant - 110mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using the Davant 110mm Soil Solvent Weld Branch Tee. It helps you understand how to install and maintain this crucial plumbing component. The main benefit is providing a robust three-way connection with access for cleaning, essential for preventing blockages. Note that proper solvent welding technique is crucial for a watertight seal.
All features
| Model Part Number | SSB0011 |
|---|---|
| Brand | Davant |
Extended Product Information
FAQs
What size pipe does this tee fit?
This branch tee is designed for use with 110mm soil pipes.
What is the access point for?
The access point allows for clearing blockages in the drain line.
What material is this tee made of?
It is made of durable PVC-U.
What standards does this product meet?
This product meets EN1329-1 & EN1566-1 standards.
What tools do I need for installation?
You will need a pipe cutter, deburring tool, solvent cement, and a cleaning solution.
How do I prevent leaks?
Ensure the pipe and fitting surfaces are clean, apply solvent cement properly, and allow adequate curing time.
How long should I wait before using the drain after installation?
Allow the joint to fully cure according to the solvent cement manufacturer's instructions, typically at least 24 hours.
Can I use this tee with different pipe sizes?
No, this tee is only compatible with 110mm pipes.
Troubleshooting
Joint leaks after installation.
Ensure the pipe and fitting surfaces were properly cleaned and that sufficient solvent cement was applied. If the leak persists, cut out the joint and redo it, following the correct procedure.
Blockage in the drain line.
Use the access point to insert a drain snake or other cleaning tool to remove the obstruction. Consider using a drain cleaning solution as well.
Difficulty in making a connection.
Ensure that the pipe is cut squarely and deburred properly. Make sure you are using the correct solvent cement and that both surfaces are clean and dry.
Pros and Cons
Pros
- Durable PVC-U construction ensures longevity.
- Access point simplifies the removal of blockages.
- Solvent weld connection provides a secure and watertight seal.
- Complies with industry standards for reliability and safety.
- Efficient design with a 92-degree branch helps with waste flow.
Cons
- Requires proper solvent welding technique for effective sealing.
- Not suitable for use with other pipe sizes.
- May require cutting of existing pipework for installation.
- Requires solvent cement, which needs to be purchased separately.
Setup, Compatibility & Care
- Preparation: Ensure you have the necessary tools and materials, including a pipe cutter, deburring tool, solvent cement, and cleaning solution.
- Cutting: Cut the soil pipe to the required length using a pipe cutter.
- Cleaning: Clean the inside of the fitting and the outside of the pipe with a cleaning solution.
- Application: Apply solvent cement to both the inside of the fitting and the outside of the pipe.
- Assembly: Immediately insert the pipe into the fitting, ensuring a firm connection.
- Holding: Hold the joint together for a few seconds to allow the solvent to set.
- Curing: Allow the joint to fully cure according to the solvent cement manufacturer's instructions, typically at least 24 hours before use.
Compatibility: This branch tee is compatible with 110mm soil pipes. Ensure all other components in your drainage system are also compatible. The product meets EN1329-1 & EN1566-1 standards.
Care: Regularly inspect the access point for leaks or damage. If a blockage occurs, use appropriate tools to clear it. Avoid using harsh chemicals that could damage the PVC-U material. Regularly inspect for any signs of wear and tear or damage.