S.A.S Super Glue Quick Setting Non-Drip Adhesive Gel - 20g - Box of 20
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for professionals and DIY enthusiasts needing a fast-acting, high-viscosity adhesive for demanding applications. The Van Line SAS SGlue Gel offers a quick-setting, non-drip formula ideal for vertical surfaces, bonding various materials in seconds. While exceptionally strong and convenient for many uses, its rapid setting time requires precise application.
All features
| Model Part Number | SAS454/20 |
|---|---|
| Brand | Van Line |
Extended Product Information
FAQs
What is the main advantage of the gel formula?
The gel formula is non-drip, making it ideal for vertical applications or surfaces where you need precise control and don't want the adhesive to run or spread uncontrollably.
How long does the adhesive typically take to set?
It bonds most materials in seconds, providing a very rapid set time for quick assembly or repairs.
Can this adhesive be used on porous materials like wood?
While it may provide some adhesion to porous materials, it is not ideal and may not create a durable bond. It is best suited for non-porous materials like metal and rubber.
How should I store the adhesive tubes?
Store the tubes in a cool, dry place away from direct sunlight and heat. Always ensure the cap is tightly sealed after use to preserve the adhesive's quality.
What is the shelf life of the product?
The shelf life typically depends on storage conditions. For best results, use within one year of purchase and ensure proper storage.
Is this product suitable for outdoor use?
The adhesive provides a strong bond for many applications. However, prolonged exposure to extreme weather conditions may affect its long-term durability. Test in an inconspicuous area if intended for critical outdoor applications.
Troubleshooting
Adhesive is not bonding quickly
Ensure both surfaces are clean, dry, and free of contaminants. Check the expiry date of the adhesive. For some materials, a surface activator might be beneficial (sold separately).
Gel is too thick to apply easily
Ensure the adhesive is stored at room temperature. Extremely cold temperatures can thicken gel adhesives. Avoid exposing the tube to excessive heat, which can degrade the adhesive.
Cap is stuck or difficult to open
Gently warm the nozzle area with your hands. If necessary, carefully use a soft cloth to grip and twist the cap. Avoid using excessive force that could damage the tube.
Pros and Cons
Pros
- Extremely fast bonding time for efficiency.
- Gel formula is easy to control and ideal for non-horizontal surfaces.
- Strong adhesion to diverse materials like metal and rubber.
- Comes in a cost-effective box of 20 for high-volume users.
Cons
- Rapid setting time allows little room for error in positioning.
- May not be suitable for very large surface areas due to quick drying.
- Requires careful handling to avoid skin bonding.
Setup, Compatibility & Care
Setup: No setup is required. Simply twist off the cap to open the tube. For the first use, it might be necessary to carefully puncture the seal on the nozzle if applicable. Always ensure the surfaces to be bonded are clean, dry, and free from dust, grease, or oil for optimal adhesion.
Compatibility: This adhesive is designed to bond metal, rubber, and most common plastics and materials. It is not recommended for use on polyethylene, polypropylene, silicone rubber, or porous materials like untreated wood or fabric where it may not form a strong bond.
Care: Store tubes in a cool, dry place away from direct sunlight and heat. Keep the cap tightly sealed after each use to prevent the gel from drying out. Avoid contact with skin and eyes. If skin contact occurs, gently peel or roll the skin apart; do not pull. For eye contact, rinse immediately with water and seek medical attention.