Connect Splice Connector - Blue - 0.75-2.5mm - Pack of 100
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Connect Splice Connector in blue is designed for tradespeople and businesses needing a quick and reliable way to create electrical connections without cutting existing wires or running new ones. Its primary benefit is simplifying the splicing process, saving time and effort on electrical installations. A key consideration is its suitability for specific wire gauges, ensuring optimal performance and safety. This pack contains 100 blue connectors, designed for cable sizes from 0.75mm² to 2.5mm².
All features
| Model Part Number | 30246 |
|---|---|
| Brand | Connect |
Extended Product Information
FAQs
What wire sizes are compatible with the blue Connect Splice Connector?
The blue Connect Splice Connector is designed for wire sizes ranging from 0.75mm² to 2.5mm².
Do I need special tools to use these connectors?
While basic connection can sometimes be achieved with pliers, using a dedicated crimping tool designed for splice connectors will ensure a secure and reliable connection. Consult the tool manufacturer's recommendations.
Can these connectors be used for automotive applications?
Yes, these connectors are suitable for many automotive wiring tasks, provided the wire gauges are within the specified range and the application is within appropriate voltage and current limits.
Are these connectors waterproof?
These connectors are designed for general electrical splicing and are not rated as waterproof. They should not be used in applications where they will be submerged in water.
How many connectors are in a pack?
This pack contains 100 blue Connect Splice Connectors.
Can I use these to join two wires of different sizes?
It is recommended to use connectors rated for the largest wire size you are joining. If joining a 1.5mm² wire to a 2.5mm² wire, use a connector suitable for 2.5mm² and ensure proper crimping for both wires.
Troubleshooting
Connection is loose or fails intermittently.
Ensure the wire gauge is within the 0.75mm² - 2.5mm² range for the blue connector. Verify that the connector has been properly crimped using an appropriate tool and sufficient force. Check that wires are stripped correctly and fully inserted into the connector.
Connector does not hold wires securely.
Confirm that the wire diameter is appropriate for the connector size. If using the wrong size connector for the wire, it may not grip effectively. Re-crimp with more force or consider if the wire insulation is too thick or too thin.
Electrical connection is not working.
Check for continuity using a multimeter to ensure the electrical path is complete through the connector. Examine the connector for any signs of damage or poor crimping. Ensure the power source is active and the circuit is functional.
Pros and Cons
Pros
- Significantly speeds up electrical connection tasks.
- Eliminates the need to cut into existing wires.
- Easy to use, requiring no special tools for basic application.
- Provides a secure and reliable connection when used within specified parameters.
- Cost-effective solution for multiple connection points.
Cons
- Limited to specific wire gauges (0.75mm² - 2.5mm²).
- Not suitable for high-voltage or high-amperage applications without further assessment.
- Requires proper crimping or connection method for optimal performance.
- May not be as robust as traditional soldered connections in extreme environments.
- Not designed for permanent submersion in water or highly corrosive conditions.
Setup, Compatibility & Care
Setup:
- Select the appropriate Connect Splice Connector (blue for 0.75mm² - 2.5mm² wire).
- Insert the stripped end of the wire to be connected into one side of the connector.
- Insert the existing wire into the other side of the connector.
- Using appropriate crimping pliers or a specialized tool, firmly crimp the connector to secure the wires.
Compatibility:
- Suitable for solid and stranded copper wires.
- Wire gauge range: 0.75mm² to 2.5mm².
- Intended for low to medium voltage DC and AC circuits. Always verify suitability for your specific application and local electrical codes.
Care:
- Store connectors in a dry environment to prevent corrosion.
- Keep connectors away from excessive heat or direct sunlight.
- Ensure connectors are only used within their specified wire gauge limits to maintain connection integrity.