Evo-Stik Rapid Set Syringe 25ml - 2-part epoxy resin
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone using Evo-Stik Rapid Set, a fast-acting epoxy adhesive. It provides an ultra-strong bond in seconds, ideal for quick repairs. However, it's essential to work quickly due to the rapid setting time. This guide covers key features, usage, troubleshooting, and frequently asked questions to help you get the best results.
All features
| Model Part Number | 30613670 |
|---|---|
| Brand | Evo-Stik |
Extended Product Information
FAQs
How long does Evo-Stik Rapid Set take to set?
It sets in approximately 5 minutes.
What materials can I use it on?
It works on ceramics, wood, chipboard, glass, metal, stone, and most hard plastics.
Is it waterproof?
Yes, once cured, it provides a waterproof bond.
Can I reuse the mixed adhesive?
No, once mixed, the adhesive must be used immediately as it sets quickly.
How should I store the product?
Store in a cool, dry place, away from direct sunlight, and out of reach of children.
How do I clean up excess adhesive?
Clean up any excess adhesive with a suitable solvent before it hardens. Refer to the product instructions for the best solvent to use.
What is the shelf life of the product?
The shelf life is typically indicated on the packaging. Always check the expiration date before use.
Troubleshooting
Adhesive not setting.
Ensure the correct ratio of the two parts was mixed. Also, check the expiration date and ensure the surfaces were properly prepared.
Bond is weak.
Make sure surfaces were thoroughly cleaned before application. Allow for complete curing time, and ensure appropriate clamping was used.
Difficulty dispensing from the syringe.
Make sure the nozzle isn't blocked and that you're applying even pressure on the syringe plunger.
Pros and Cons
Pros
- Sets in seconds, saving time and increasing efficiency.
- Provides a strong and durable bond on a wide range of materials.
- Easy to use with the twin syringe design, ensuring accurate mixing.
- Resealable cap for convenient storage and multiple uses.
- Ideal for both professional and DIY projects.
Cons
- Rapid setting time requires quick application and precision.
- Once mixed, the adhesive is not reusable.
- May not be suitable for extremely flexible materials.
- Requires careful surface preparation for optimal bonding.
Setup, Compatibility & Care
Setup
- Preparation: Clean the surfaces to be bonded, ensuring they are free from dust, grease, and moisture.
- Mixing: Dispense equal parts from both chambers of the twin syringe onto the provided tray or a suitable mixing surface.
- Mixing: Thoroughly mix the two parts with the spatula until a uniform color is achieved.
- Application: Apply the mixed adhesive to one or both surfaces.
- Bonding: Join the surfaces and hold them together firmly for a few minutes until the adhesive starts to set. Clamp the pieces if necessary.
- Curing: Allow the bond to fully cure for the time specified on the packaging before stressing the joint.
Compatibility
Evo-Stik Rapid Set is compatible with:
- Ceramics
- Wood
- Chipboard
- Glass
- Metal
- Stone
- Most hard plastics
Care
- Store in a cool, dry place.
- Avoid direct sunlight.
- Keep out of reach of children.
- Clean up any excess adhesive with a suitable solvent before it hardens.