Laser Impact Socket - 41mm - 1/2"D
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Laser 41mm impact socket is designed for automotive professionals and DIY enthusiasts working on specific BMW models (5 & 7 series, 2013 onwards). Its key benefit is efficiently removing the 12-point holding nut for the front lower ball joint. A potential caveat is its specialized application, meaning it may not be suitable for general-purpose use.
All features
| Model Part Number | 8366 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What specific vehicles is this socket designed for?
This socket is designed for the front lower ball joint holding nut on BMW 5 Series and 7 Series vehicles manufactured from 2013 onwards.
Can I use this socket for general automotive repairs?
While it is a 1/2" drive impact socket, its 41mm 12-point configuration is highly specialized. It is not intended for general-purpose use and may not fit most other nuts or bolts.
What material is the socket made from?
The socket is manufactured from durable chrome molybdenum steel.
What is the purpose of the black phosphate finish?
The black phosphate finish provides enhanced corrosion resistance and a professional appearance, contributing to the tool's longevity.
What is the drive size of this socket?
The drive size is 1/2 inch.
How deep is this socket?
The socket has a depth of 52mm.
Is this socket suitable for use with a breaker bar?
Yes, it is suitable for use with a 1/2" drive breaker bar, but caution should be exercised to avoid over-torquing or damaging the component being worked on.
Troubleshooting
Socket does not fit the nut.
Verify that you are working on the correct BMW models and year range specified (5 & 7 Series, from 2013). Confirm the nut is indeed a 12-point type and not a standard 6-point. Ensure the socket is fully seated on the drive tool.
Socket appears damaged after initial use.
Inspect the socket for any signs of cracking or deformation. If damage is present, discontinue use and contact the retailer for a replacement, as this may indicate a manufacturing defect or improper application.
Difficulty removing the ball joint nut.
Ensure you are using adequate torque from your impact wrench or ratchet. If the nut is severely seized, consider using a penetrating lubricant and allowing it time to work before attempting removal again. Confirm the socket is properly engaged with the nut.
Pros and Cons
Pros
- Specifically designed for a critical BMW suspension component.
- Durable construction from chrome molybdenum steel.
- Impact rated for use with power tools.
- Corrosion-resistant black phosphate finish.
- Clear 1/2" drive compatibility.
Cons
- Highly specialized; limited use outside of specified BMW applications.
- Not suitable for standard 6-point nuts.
- Requires a 1/2" drive tool, not compatible with smaller drive sizes.
Setup, Compatibility & Care
Setup: This socket requires a 1/2" drive ratchet or impact wrench. Simply attach the socket to the drive of your tool until it clicks securely into place.
Compatibility: Primarily designed for the 12-point holding nut on the front lower ball joint of BMW 5 Series (from 2013) and BMW 7 Series (from 2013) vehicles. Ensure your specific vehicle model and year fall within this range before use.
Care: After use, clean the socket to remove dirt and debris. A light oiling can help prevent rust, especially if stored in a humid environment. Store in a dry place.