Rubio Monocoat DuroGrit Outdoor Wood Oil - Foxy Brown - 1 L
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Rubio Monocoat DuroGrit Outdoor Wood Oil is designed for homeowners and DIY enthusiasts looking for a sustainable, durable, and easy-to-apply finish for all exterior wood surfaces. Its key benefit is providing long-lasting protection and color in a single layer with minimal effort, while its main caveat is that results can vary based on wood type, necessitating a sample test. This oil-based coating utilizes patented FibreGrit Technology to offer a saturating yet breathable finish that is water and dirt repellent, resistant to cracking, peeling, and flaking, and provides robust UV protection, all while maintaining the natural look and feel of the wood.
All features
| Model Part Number | DGFBROWN/1L |
|---|---|
| Brand | Rubio Monocoat |
Extended Product Information
FAQs
Do I need to sand my wood before applying DuroGrit?
For untreated wood, sanding is not required. If your wood has an existing finish, is heavily weathered, or contains grease, preparation such as cleaning or light sanding might be necessary to ensure proper adhesion.
How long does it take for DuroGrit to dry?
DuroGrit is fast-drying. It is typically ready for light foot traffic after 24 hours and fully cures over the next few days. However, always refer to the product's specific instructions for precise drying times under various conditions.
What is the best way to clean a deck treated with DuroGrit?
Clean treated surfaces with a soft brush or broom. For more thorough cleaning, use a mild soap and water solution and rinse well. Avoid using high-pressure washers or harsh chemical cleaners.
Can I apply a second coat of DuroGrit?
DuroGrit is designed as a one-layer system. Applying multiple coats is generally not recommended as it can lead to a sticky finish or affect the breathability of the wood. If reapplication is needed due to wear, apply a single, thin coat.
How much area does one liter of DuroGrit cover?
Coverage varies depending on the wood type and porosity. Typically, one liter covers approximately 5.75 square meters (for the 500ml size, but extrapolating for 1L it would be around 11.5 sqm). It's always recommended to do a test application to determine actual coverage on your specific project.
Will DuroGrit change the natural look of my wood?
DuroGrit is formulated to enhance and protect the natural look and feel of the wood. It provides color and protection while maintaining a matte, natural appearance. The exact final look will depend on the wood species and the color chosen.
Is DuroGrit safe for use around plants and pets?
DuroGrit is a sustainable, ecological, plant-based oil. Once cured, it is generally safe for use in outdoor environments. However, it's always best to prevent direct contact with food preparation surfaces and to keep pets and children away from the application area until the product is fully dry.
Troubleshooting
Uneven color or patchiness after application.
This often occurs if excess product was not removed properly or if the wood surface was unevenly absorbent. Ensure you wiped off all excess within the recommended time and consider a spot test on a similar wood piece to gauge absorption.
Product not drying properly.
Ensure the wood was completely dry before application and that the ambient temperature and humidity are within the recommended range (typically between 50°F - 95°F or 10°C - 35°C). Avoid applying during rain or extreme temperatures.
Surface feels sticky or tacky after drying.
This usually means too much product was applied or excess was not wiped off completely. Try buffing the affected area with a clean, lint-free cloth. For severe cases, you may need to lightly sand and reapply a very thin coat, ensuring all excess is removed.
Water is still beading on the surface after several weeks.
This indicates the oil has not fully cured or bonded with the wood. Ensure the recommended drying times were followed and avoid prolonged exposure to standing water. If it persists, a very light reapplication may be needed.
Pros and Cons
Pros
- Environmentally friendly, plant-based formula.
- Single-layer application saves time and product.
- Durable and wear-resistant finish.
- Excellent UV protection for longevity.
- Maintains natural wood aesthetic.
- Suitable for all exterior wood types.
Cons
- Results can vary significantly depending on the wood type.
- Requires testing on a sample area before full application.
- Matte finish may not be preferred by all users.
- Availability of specific colors and sizes may vary.
Setup, Compatibility & Care Instructions
Setup: Ensure the exterior wood surface is clean, dry, and free from any existing finishes, grease, or contaminants. For untreated wood, no sanding is required. If wood is weathered or has old finishes, it may need preparation.
Application: Apply DuroGrit in a single, thin, uniform layer using a brush or roller. Work in manageable sections and maintain a wet edge to avoid overlap marks. Wipe off any excess product that does not penetrate the wood within 10-15 minutes using a lint-free cloth. Allow the surface to dry for at least 24 hours before exposing it to light foot traffic or moisture.
Compatibility: DuroGrit is suitable for all exterior wood types, including hardwoods like teak and oak, and softwoods like pine and cedar. It can be used on decks, fences, garden furniture, and other outdoor wooden structures.
Care: Clean treated surfaces with a soft brush or broom. For deeper cleaning, use a mild soap and water solution, rinsing thoroughly. Avoid using harsh chemicals or abrasive cleaners that can damage the finish. Reapplication may be necessary over time, depending on wear and exposure, following the same one-layer application method.