Universal Reservoir 5 Litre White-Transparent PE Polyethylene - Laser Tools 7010
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This set of four 5-litre colour-coded jugs is designed for mechanics and DIY enthusiasts who need to accurately measure and transfer oils and other liquids while preventing cross-contamination. The key benefit is the colour-coding system that allows for clear identification of different fluids, preventing costly mistakes. A potential caveat is that the jugs are made of polyethylene, which may not be suitable for all harsh chemicals.
All features
| Model Part Number | 7010 |
|---|---|
| Brand | Laser |
Extended Product Information
FAQs
What material are the jugs made from?
The jugs are manufactured from polyethylene (PE).
How many jugs are included in the set?
The set includes four jugs.
Can these jugs be used for fuel?
While they can hold some fuels, they are primarily designed for oils and workshop liquids. Always check chemical compatibility before storing fuels.
Are the measurement markings accurate?
Yes, the jugs feature metric and imperial measurement markings designed for accuracy in measuring and transferring liquids.
How should I clean the jugs?
Clean with warm, soapy water and rinse thoroughly. Allow to air dry completely.
What is the purpose of the coloured caps?
The coloured dust caps help in identifying which type of oil or liquid is stored in each jug, preventing cross-contamination.
Is the spout flexible?
Yes, each jug is designed with a flexi-spout for easier and more controlled pouring, especially in tight spaces.
Troubleshooting
Jug leaks from the spout.
Ensure the flexi-spout is correctly seated and not damaged. Check for any cracks or wear on the spout material.
Measurements are unclear.
Clean the exterior of the jug where the markings are located. Ensure adequate lighting when reading the scale.
Colour-coded cap is difficult to remove/attach.
Ensure the cap and the jug opening are clean and dry. Gently twist and pull/push to engage or disengage the cap.
Plastic has become cloudy or stained.
This can occur with prolonged exposure to certain fluids or sunlight. Clean as per care instructions. For severe staining, consider using a dedicated plastic cleaner suitable for polyethylene, or replace the affected jug if clarity is critical.
Pros and Cons
Pros
- Prevents oil cross-contamination through colour-coding.
- Large 5-litre capacity is practical for various tasks.
- Flexi-spout enhances pouring accuracy and control.
- Clear metric and imperial measurement markings.
- Durable construction from polyethylene.
Cons
- Material (polyethylene) may have compatibility issues with certain aggressive chemicals.
- Five litres might be excessive for very small, specific fluid transfer needs.
- Colour-coding relies on user adherence; incorrect use negates the benefit.
Setup, Compatibility & Care
Setup:
These jugs require no assembly. They are ready for immediate use upon unpacking.
Compatibility:
- Fluids: Primarily designed for oils and general workshop liquids. Always verify chemical compatibility if using with substances other than standard automotive oils.
- Materials: Manufactured from polyethylene (PE). While durable for common automotive fluids, it is advisable to avoid prolonged contact with highly aggressive solvents or chemicals that may degrade PE.
Care:
- Cleaning: After each use, empty the jug completely. Wash with warm, soapy water. A bottle brush can be helpful for reaching the bottom. Rinse thoroughly.
- Drying: Allow the jugs to air dry completely before storing to prevent moisture buildup.
- Storage: Store upright in a clean, dry area. Ensure dust caps are securely fitted to keep the interior clean.
- Cross-Contamination Prevention: To maintain the integrity of the colour-coding system, it is recommended to dedicate each jug to a specific type of fluid. If a jug must be used for a different fluid, wash it thoroughly and ensure it is completely dry before use.