100mm Through-Wall Ventilation Kit - 500mm Duct - SD-95157
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaDirect 100mm Through-Wall Ventilation Kit is designed for homeowners and DIY enthusiasts looking to establish a reliable, straight-run air extraction path for bathrooms, kitchens, or utility rooms. It offers the key benefit of a complete, all-in-one installation package that includes a backdraft damper to prevent cold air entry, though users must note that the 500mm rigid duct may require cutting to length depending on the specific thickness of the wall.
All features
| Model Part Number | SD-95157 |
|---|---|
| Brand | SolaDirect |
Extended Product Information
FAQs
Can I use this for a clothes dryer vent?
This kit is intended for general ventilation extraction and is not rated for the high heat or lint volumes produced by clothes dryers.
Does the kit come with a fan?
No, this is a passive ventilation kit designed to be used with an existing extractor fan.
What is the size of the interior grille?
The interior grille measures 170 x 170mm.
Is the insect screen removable?
Yes, the interior grille can be removed to access the screen for cleaning.
Can I cut the duct shorter?
Yes, the rigid duct is made of a cuttable material and can be shortened to fit your wall thickness.
Are the screws and plugs suitable for brick walls?
Yes, the included wall plugs are designed for standard masonry and brick installations.
Troubleshooting
Backdraft damper making noise during wind
Ensure the external cover is mounted perfectly level; a slight tilt can cause the flaps to hang unevenly.
Airflow seems restricted
Check the interior insect screen for dust or lint buildup and clear it with a soft brush.
Duct is too long for the wall
Use a fine-toothed hacksaw to trim the rigid duct to the required length, ensuring a straight cut.
Pros and Cons
Pros
- Includes all necessary mounting hardware
- Effective at preventing backdrafts and cold air infiltration
- Clean, professional finish on both interior and exterior walls
- Easy to install for those with basic DIY experience
Cons
- Requires manual trimming of the duct for non-standard wall thicknesses
- Rigid ducting is less flexible than hoses if the wall opening is slightly misaligned
- Limited to 100mm diameter applications
Setup, Compatibility & Care
Before starting, ensure the wall opening is cleared of obstructions. Measure the wall thickness and trim the rigid duct approximately 5-10mm shorter than the wall depth to allow the grilles to sit flush. Use a level to ensure the duct is slightly sloped downwards toward the outside to allow any condensation to drain away. Care involves periodically removing the interior grille to clear dust from the insect screen, and ensuring the external backdraft flaps move freely after heavy weather events.