Shopping.co.uk

TP-Link PoE Injector - TL-POE2412G

Not AvailableTP-Link PoE Injector - TL-POE2412G

The TP-Link TL-POE2412G is a passive PoE adapter designed to simultaneously supply power and trans...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

TP-Link PowerLine Network Adapter Kit - TL-WPA4220 KIT V4From £40View product TP-Link Powerline Extender - AV1000 Gigabit, AC1200 Wi-Fi - TL-WPA7617 (UK)From £55View product Powerline Adapter Kit - TP-Link TL-PA7017P KIT (UK)From £50View product TP-Link G.hn2400 Powerline AX1800 Wi-Fi 6 Kit - PGW2440 KIT (UK)From £130View product

Product Information

Full details

The TP-Link TL-POE2412G is an essential solution for network administrators and home users needing to power 24V passive PoE-enabled devices, such as Omada access points or outdoor CPE units, via a single Ethernet cable. This adapter simplifies installations by combining data transmission and power delivery, though it is specifically designed for 24V passive PoE hardware and will not work with standard 802.3af/at active PoE devices. It is a reliable, plug-and-play device that supports full Gigabit speeds for high-performance network environments.

All features

Model Part NumberPOE2412G
BrandTP-Link

Extended Product Information

FAQs

Is this adapter compatible with standard 802.3af PoE cameras?

No. This adapter provides 24V passive PoE, which is different from the 48V standard active PoE (802.3af/at). It will not power standard PoE cameras.

What is the maximum cable length I can use?

The maximum recommended operating distance for data and power is 100 meters (328 feet).

Does this require any driver or software installation?

No, it is a hardware-based, plug-and-play device that requires no software or configuration.

Can I use this for outdoor devices?

Yes, it is commonly used to power outdoor CPEs, but the adapter itself should be kept in a dry, indoor environment.

What kind of Ethernet cables should I use?

You should use high-quality Cat5, Cat5e, or Cat6 cables to ensure optimal data transfer and power delivery.

What is the maximum power output?

The TL-POE2412G provides an output power of up to 12W.

Troubleshooting

The connected device is not powering on.

Verify that the device requires 24V passive PoE, as this adapter is not compatible with standard active PoE (802.3af/at) devices.

Network speed is slower than expected.

Ensure you are using high-quality Cat5e or Cat6 cables, as lower-grade cables may limit speed or cause packet loss.

The Power LED does not light up.

Check that the power cord is securely plugged into both the wall outlet and the adapter, and test the wall outlet with another appliance.

Pros and Cons

Pros

  • Supports full Gigabit Ethernet speeds
  • Compact and easy to mount
  • Plug-and-play with no software needed
  • Includes necessary wall-mounting hardware

Cons

  • Not compatible with standard 802.3af/at active PoE devices
  • Limited to 12W of power output
  • Requires a 24V passive PoE specific device

Setup, Compatibility & Care

To install, connect your network switch or router to the 'LAN' port on the adapter using a standard Ethernet cable. Then, connect your PoE-compatible device to the 'POE' port. Plug the adapter into a standard AC wall outlet using the included power cord. The 'Power' LED indicator will illuminate once the device is active. Always ensure the total cable run does not exceed 100 meters, as signal degradation or power loss may occur. Keep the unit in a well-ventilated area within the operating temperature range of 0 to 40°C. Periodically check that cable connections are secure and free of dust or debris for optimal conductivity.