SPAX T-STAR plus drive increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. SPAX T-STAR plus drive increases the contact surface of our T-STAR plus and ensures optimal positioning for the T-STAR plus bits in the screw head. By enabling maximum force transmission from the screwdriver to the screw, T-STAR plus guarantees simple and ultra-fast work. For firmer and faster driving with less effort, choose these SPAX T-STAR Plus wood screws. The head is designed to offer maximum, precise force transmission from the screwdriver to the screw - insertion is simple, fast and efficient, with no annoying bit slips. Screws can be countersunk into the wood cleanly and flush, with almost no need to pre-drill thanks to the sharp 4CUT point - even in the edge areas of your workpiece that are normally prone to splitting. With a WIROX coating too, the screws benefit from extra protection and durability.* T-STAR Plus drive - optimum bit position in screw head* Firmer and faster driving - no more bit slips* Countersunk head for a flush fit in the wood* No pre-drilling required (wood-dependent)* 4CUT point reduces wood splitting and tearing* WIROX coating for excellent corrosion protection Spax T-Star Plus Flat CSK Wirox Coated T10 3.0 x 16mm (200Pk) in Silver Steel Use: universal indoor and outdoor use without direct weathering. Spax-exclusive Wirox surface: 20 times higher corrosion protection compared to conventional bare zinc plating than required by standard As a multi-head pronounced countersunk head for flush countersinking and comfortable processing, milled in wood, brakes on metal. Optimal power transmission and clean fit even when processing overhead thanks to SPAX bit T-Star plus T10 with guide pins Effortless work and longer battery life: no pre-drilling (depending on the wood). Easy penetration, reduction of the splitting effect thanks to 4CUT: Four edges in the screw tip. Easier cutting of the wood fibre thanks to Spax wave profile Made in Germany – approved by building authorities: European technical approval for screws as wood fasteners in load-bearing wooden constructions (ETA-12/0114), Weight: 0.25132697868 pounds, Manufacturer: SPAX International GmbH & Co. KG Article 88091 St. GEH. Seko T galvanic galvanized ABC-SPAX / wood-construction screws countersunk head, inner star drive (Star) dimension: 3 x 16/13-TThis text is machine translated.