Bartoline Teak Oil Wood Furniture Sealer - 3 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Bartoline Teak Oil is a specialized wood treatment formulated for homeowners looking to restore and protect the natural beauty of outdoor garden furniture and interior matt-finished hardwoods. By replenishing essential oils stripped away by weathering and daily wear, this product provides a deep, nourishing finish that keeps oak and teak surfaces supple and resilient. While it offers excellent protection, users must be diligent about proper surface preparation and safe handling of oil-soaked rags to prevent fire hazards.
All features
| Model Part Number | TK4670 |
|---|---|
| Brand | Bartoline |
Extended Product Information
FAQs
Can I use this on softwoods like Pine?
Bartoline Teak Oil is specially formulated for hardwoods. While it may apply to softwoods, it is most effective on dense woods like Teak and Oak.
How long should I wait between coats?
You should allow at least 24 hours of drying time between each coat for the best results.
Do I need to sand the furniture first?
Yes, any previous paint or varnish must be removed with sandpaper to allow the oil to penetrate the wood grain.
How do I safely dispose of the cloths?
Wash them thoroughly in soapy water immediately after use and dispose of them outside; do not leave them in a pile as they can self-ignite.
Can I use this on interior furniture?
Yes, it is ideal for interior furniture where a traditional, natural matt finish is desired.
What should I use to clean my brushes?
You must use White Spirit to clean your brushes and application tools immediately after you finish using the oil.
Troubleshooting
The surface remains sticky or tacky after 24 hours.
Excess oil was not wiped off after application. Wipe the surface with a cloth dampened with White Spirit to remove the sticky residue.
The oil is not absorbing into the wood.
The wood may still have a factory finish, varnish, or old paint present. Sand the surface down to bare wood and clean with White Spirit before reapplying.
Uneven finish or spotting.
This often occurs due to uneven sanding. Ensure the entire surface has been sanded uniformly before applying the first coat.
Pros and Cons
Pros
- Restores the rich, natural appearance of aged wood
- Easy to apply with basic household tools like cloths or brushes
- Highly effective on demanding hardwoods like Oak and Teak
- Protects against further weathering and drying
- Provides a sophisticated, traditional matt finish
Cons
- Requires significant surface preparation including sanding and degreasing
- Long drying time (24 hours per coat) for optimal results
- Oily rags pose a specific self-ignition fire risk if not handled correctly
- Cleaning application tools requires White Spirit rather than water
Setup, Compatibility & Care
Before starting, ensure your workspace is well-ventilated and dry. The product is primarily compatible with unfinished or previously oiled hardwoods. Always test on an inconspicuous area first if you are unsure of the wood's current finish.
Care instructions are critical for this product:
- Clean all brushes and application tools thoroughly with White Spirit immediately after use.
- Do not pile up oily cloths. Because these cloths can self-ignite, you must wash them in hot soapy water immediately after you finish your application.
- Always dispose of used cleaning materials safely in an outdoor bin away from structures.