Sheet Metal Punch - Q.Max - Qma35M
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Q.Max Sheet Metal Punch (Qma35M) is designed for professionals and DIY enthusiasts needing to create clean, metric-sized holes in sheet metal up to 16 gauge. Its key benefit is producing burr-free holes that require no additional finishing, saving time and effort. A caveat is that smaller cutters (up to 15mm) have a different configuration than larger ones, requiring attention to component assembly. This tool features heat-treated cutting edges with a black anti-corrosive finish for durability and rust prevention.
All features
| Model Part Number | Qma35M |
|---|---|
| Brand | Q.Max |
Extended Product Information
FAQs
What is the maximum metal thickness the Qma35M can cut?
The Q.Max Sheet Metal Punch (Qma35M) is designed to cut clean holes in sheet metal up to 16 gauge in thickness.
Do I need to buy anything else to use the punch?
Yes, the punches are sold singly and require a compatible die and a hexagonal key, which must be ordered separately.
Will I need to deburr the holes after cutting?
No, the special design of the Q.Max punch produces a burr-free hole that typically requires no extra finishing.
How do I maintain the punch to prevent rust?
After use and cleaning, apply a light coat of oil to the cutting edges and metal components. Store the tool in a dry environment.
Are the setup instructions the same for all sizes?
No, instructions differ for cutters up to 15mm and those 15mm and over. Larger cutters have a simplified configuration, often with the thread integrated directly into the punch.
What does the anti-corrosive surface finish do?
The black anti-corrosive surface finish helps to prevent rusting of the tool's components, extending its lifespan.
Troubleshooting
Punch does not cut through the metal.
Ensure the metal is within the 16-gauge limit. Check that the die nut is screwed tightly against the metal surface. Verify the hexagonal screw is being turned with sufficient torque. Make sure the cutting edges are sharp and free of debris.
Hole is not clean or has burrs.
Clean the punch and die edges. Ensure the punch is aligned correctly and perpendicular to the metal. For thinner metals, consider using a backing material or adjusting the pressure slightly. Sharpen or replace the cutting edges if they are dull.
Tool is difficult to turn or jams.
Lubricate the screw threads and the die. Remove any metal shavings or debris from the cutting area. Ensure all components are correctly aligned and that the punch is not excessively worn.
Rust appears on the tool.
Clean the affected area thoroughly. Apply a rust inhibitor or a light oil to the surface. Store the tool in a dry place to prevent future rusting.
Pros and Cons
Pros
- Creates clean, burr-free holes, reducing post-processing time.
- Capable of cutting up to 16 gauge sheet metal.
- Heat-treated cutting edges ensure durability.
- Anti-corrosive finish protects against rust.
- Designed for even load distribution for consistent cuts.
Cons
- Requires a separate key to operate.
- Assembly instructions differ for cutters 15mm and over.
- Sold as individual punches, requiring separate purchase of dies and keys.
- Limited to sheet metal applications.
Setup, Compatibility & Care
Setup (Cutters up to 15mm):
- Thread the punch onto the hexagonal screw.
- Pass the hexagonal screw through the pilot hole in the sheet metal.
- Position the die on the die nut.
- Screw the die nut onto the projecting hexagonal screw until it touches the metal sheet.
- Use a hexagonal key to turn the hexagonal screw.
Setup (Cutters 15mm and over):
Note: These larger cutters have a different configuration, often with the thread integrated directly into the punch, and may have fewer components.
- Follow the specific instructions provided with the larger cutter set, as the die nut may not be required or the assembly order may differ.
Compatibility:
- Designed for sheet metal up to 16 gauge.
- Compatible with standard metric hole sizes.
- Requires a compatible hexagonal key (ordered separately).
Care:
- Clean cutting edges after each use to maintain sharpness.
- Apply a light coat of oil to prevent rust, especially after cleaning.
- Store in a dry environment.
- Periodically check the anti-corrosive finish and reapply if necessary.