Heartstones at Sunset Kitchen Splashback - Warren Reed - Designer - WR00952-P453
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This premium 6mm toughened glass splashback by Warren Reed - Designer is ideal for homeowners looking to add both style and practicality to their kitchen. Its striking high-resolution 'Heartstones at Sunset' print creates a beautiful focal point, while the durable, easy-to-clean surface protects your walls. The only caveat is the requirement for specific adhesive during installation.
All features
| Model Part Number | WR00952-P453 |
|---|---|
| Brand | Warren Reed - Designer |
Extended Product Information
FAQs
What type of adhesive should I use?
You must use a Clear Natural Curing Adhesive specifically designed for glass splashbacks. Follow the adhesive manufacturer's instructions carefully for application and curing times.
Can I install this behind any type of hob?
Yes, the splashback is scratch-resistant and can withstand temperatures up to 400°C, making it suitable for use behind electric, ceramic, and induction hobs. For gas hobs, ensure there is adequate clearance as per the hob manufacturer's safety guidelines.
How do I clean the splashback?
Clean with a soft, damp cloth and a mild, non-abrasive kitchen cleaner. Avoid harsh chemicals or abrasive scouring pads.
What are the available sizes?
The splashback is available in several sizes, including W600mm x H750mm, W700mm x H750mm, W900mm x H750mm, W600mm x H600mm, W600mm x H650mm, W700mm x H650mm, and W900mm x H650mm.
Is the 'Heartstones at Sunset' design customisable?
The product is offered with a pre-printed 'Heartstones at Sunset' design. Customisation options are not specified for this particular model.
What is the thickness of the glass?
The splashback is made from premium 6mm toughened glass.
Does it come with a warranty?
Yes, the product comes with a 1-year guarantee.
Troubleshooting
Splashback is not adhering properly
Ensure the wall surface was clean, dry, and free of dust before adhesive application. Verify that the correct type of adhesive (Clear Natural Curing Adhesive) was used and applied according to instructions. Allow adequate curing time.
Print appears faded or damaged
The print is protected by the glass. If fading or damage is apparent, it may be due to improper cleaning agents. Stick to soft cloths and mild, non-abrasive cleaners. If the damage is physical (e.g., a deep scratch), it cannot be repaired and may require replacement.
Difficulty in cleaning stubborn marks
Use warm water with a small amount of mild dish soap. Apply with a soft cloth and gently wipe. Avoid abrasive cleaners or pads that could scratch the surface.
Glass chipped or cracked during installation
This can occur if the glass is mishandled or if the wall surface is uneven, causing stress. Ensure careful handling during installation. If damage occurs, the splashback may need to be replaced.
Pros and Cons
Pros
- Durable and long-lasting construction with toughened glass.
- Aesthetically pleasing design that transforms kitchen appearance.
- Hygienic and simple to maintain cleanliness.
- Protects walls from splashes and heat.
- Straightforward installation without needing tools for drilling.
Cons
- Requires specific Clear Natural Curing Adhesive for installation.
- Glass can be heavy, requiring careful handling during installation.
- Limited to kitchen use; not recommended for other high-moisture or high-heat areas.
- Bevelled edges, while stylish, might be susceptible to chipping if impacted hard.
- The specific print might not suit all kitchen decors.
Setup, Compatibility & Care
Setup: Before installation, ensure the wall surface is clean, dry, and smooth. It is crucial to use Clear Natural Curing Adhesive specifically recommended for glass splashbacks. Apply the adhesive evenly to the wall or the back of the splashback according to the adhesive manufacturer's instructions. Carefully position the splashback and press firmly to ensure good contact. Allow the adhesive to cure fully before exposing the splashback to heat or moisture.
Compatibility: This splashback is designed for use in kitchens, specifically behind hobs and sinks. It is compatible with most standard kitchen wall types when properly adhered. It can be installed over tiles or painted plasterboard surfaces, provided they are sound and prepared correctly.
Care: To maintain its appearance, clean the surface regularly with a soft, damp cloth and a non-abrasive kitchen cleaner. Avoid using harsh chemicals, scouring pads, or abrasive cleaners, which could scratch or damage the glass or print. For stubborn marks, a solution of warm water and mild detergent should suffice.