Q.Max Sheet Metal Punch - 21mm
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Q.Max Sheet Metal Punch (21mm) is designed for professionals and DIY enthusiasts needing to create clean, metric-sized holes in sheet metal up to 16 gauge. Its key benefit is producing burr-free holes that require no secondary finishing, saving time and effort. A caveat to note is that the punch is sold without the required hexagonal key, which must be ordered separately. This tool features heat-treated cutting edges with a black anti-corrosive finish for durability and rust prevention, ensuring reliable performance for a variety of metalworking tasks.
All features
| Model Part Number | Qma21M |
|---|---|
| Brand | Q.Max |
Extended Product Information
FAQs
What is the maximum material thickness the Q.Max 21mm punch can cut?
The Q.Max Sheet Metal Punch is designed to cut clean holes in sheet metal up to 16 gauge (approximately 1.5mm).
Does the Q.Max Sheet Metal Punch come with the hexagonal key?
No, the Q.Max Sheet Metal Punch is sold individually, and the required hexagonal key must be ordered separately.
How do I ensure a burr-free hole?
The punch is designed for burr-free cuts. Ensure the punch and die are clean, properly aligned, and that the material is within the specified thickness limit. Steady, consistent force is also key.
What maintenance is required for the Q.Max Sheet Metal Punch?
After use, clean off any metal shavings and apply a light coat of oil to the cutting edges and threads to prevent rust. Store in a dry place.
Are there different instructions for larger punch sizes?
Yes. The instructions provided apply to cutters up to 15mm. For cutters 15mm and over, the configuration differs, notably having the thread integrated into the punch itself and omitting the die nut.
What is the purpose of the anti-corrosive surface finish?
The black anti-corrosive surface finish is applied to prevent rusting and protect the tool from environmental degradation, ensuring its longevity and performance.
Troubleshooting
Punch is difficult to turn or cut.
Ensure the sheet metal is not thicker than 16 gauge. Check for debris between the punch, die, and workpiece. Verify the hexagonal screw and die nut are properly aligned and seated.
Hole is not clean or has rough edges.
Sharpen or replace the punch if it is dull. Ensure the die is clean and properly seated against the metal surface. Check that the hexagonal screw is being turned with sufficient, steady force.
Punch or die is rusting.
Clean the tool thoroughly and apply a light coating of machine oil or rust inhibitor. Store the punch in a dry environment.
Hexagonal screw is stripping.
Use the correct size hexagonal key. Apply steady, even pressure. Avoid excessive force if resistance is too high, which may indicate a material thickness issue or a dull punch.
Pros and Cons
Pros
- Produces clean, burr-free holes requiring no additional finishing.
- Durable construction with heat-treated cutting edges for longevity.
- Anti-corrosive finish prevents rust and extends tool life.
- Efficiently cuts up to 16-gauge sheet metal.
- Special design ensures even load distribution during cutting.
Cons
- Hexagonal key must be purchased separately.
- Instructions vary for cutters 15mm and over.
- Not suitable for materials thicker than 16-gauge sheet metal.
- Individual punches require ordering the correct size key.
Setup, Compatibility & Care
**Setup (for cutters up to 15mm):
- Thread the punch onto the hexagonal screw.
- Pass the hexagonal screw through the desired hole location.
- Position the die on top of the die nut.
- Screw the die nut onto the projecting hexagonal screw until it contacts the metal sheet.
- Use a hexagonal key (ordered separately) to turn the hexagonal screw, pulling the punch through the metal.
Note: Cutters 15mm and over have a different configuration where the thread is in the punch, and there is no die nut.
Compatibility:
- Suitable for sheet metal up to 16 gauge.
- Requires a separate hexagonal key of the appropriate size.
Care:
- Clean the punch and die after each use to remove metal shavings.
- Apply a light coat of oil to the cutting edges and threads to prevent rust, especially during storage.
- Store in a dry environment. The anti-corrosive finish provides protection, but long-term exposure to moisture can still lead to degradation.