SolaDirect Wall Vent Kit - 100mm - 500mm Duct - SD-95256
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The SolaDirect 100mm Wall Vent Kit is designed for homeowners and DIY enthusiasts looking to establish a reliable ventilation path through an exterior wall in spaces like kitchens, bathrooms, and utility rooms. This comprehensive kit provides an efficient way to manage airflow, featuring an adjustable internal grille and a protective external shutter, though users should note that the 500mm duct length may require cutting or additional extensions depending on the specific wall thickness of their building.
All features
| Model Part Number | SD-95256 |
|---|---|
| Brand | SolaDirect |
Extended Product Information
FAQs
Can I use this for a kitchen range hood?
While it fits 100mm ducts, check the CFM requirements of your range hood, as many require larger ducting for safety and efficiency.
Is the insect screen removable?
Yes, the nylon screen can typically be accessed by removing the indoor grille cover for periodic cleaning.
What tools are needed for installation?
You will need a drill with a 100mm hole saw or core bit, a screwdriver, a hacksaw (if shortening the duct), and exterior-grade silicone sealant.
Can I paint the grilles?
The grilles are made of standard PVC, which can be painted with suitable plastic-adhesion primer and paint, though the finish may not be as durable as the factory coating.
Does this include the exhaust fan motor?
No, this is a passive ducting and grille kit. It does not include an electric fan or motor.
Troubleshooting
External shutter is stuck or noisy in high winds
Clean any dust or debris from the shutter hinge and ensure it is mounted perfectly level.
Airflow feels restricted
Check if the internal adjustable shutter is set to the fully open position and inspect the insect screen for clogs.
Water dripping from the duct inside
Ensure the duct is installed with a slight downward angle toward the exterior of the building to allow drainage.
Pros and Cons
Pros
- Complete "all-in-one" kit reduces the need for sourcing individual parts
- Adjustable indoor shutter allows for manual control of extraction levels
- Includes essential mounting hardware like screws and wall plugs
- One-way exterior shutter effectively reduces external drafts
- Integrated insect screen adds a layer of pest protection
Cons
- Duct length is fixed at 500mm and may require modification for thin or very thick walls
- Rigid PVC ducting requires careful measurement before installation
- Limited to a 100mm diameter, which may be insufficient for high-power commercial extractors
Setup, Compatibility & Care
Before starting, ensure your wall thickness does not exceed the 500mm duct length; if the wall is thinner, use a hacksaw to trim the PVC pipe to the required size. For thicker walls, you will need to source additional compatible 100mm ducting and a connector.
- Drill a 100mm hole through the wall.
- Insert the PVC duct, ensuring a snug fit.
- Secure the outdoor grille using the provided screws and wall plugs, applying a bead of silicone sealant around the frame to prevent water ingress.
- Attach the indoor grille and adjust the shutter to your desired airflow setting.
For care, periodically remove the indoor grille cover to clear lint or dust from the insect screen, and occasionally check the exterior shutter to ensure it is free of debris and continues to swing open and closed smoothly.