Frenchic Trim Paint - Green - 500ML
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for DIY enthusiasts and homeowners looking to refresh interior woodwork, furniture, and radiators with a durable and easy-to-use paint. The key benefit is its all-in-one formulation, which simplifies the painting process by eliminating the need for primers and top coats, offering a robust, satin finish. A potential caveat is that while it covers multiple surfaces, specialized preparation might be needed for very glossy or challenging materials to ensure optimal adhesion.
All features
| Colour | Green |
|---|---|
| Model Part Number | 39983680684119 |
| Brand | Frenchic |
Extended Product Information
FAQs
Do I really need a primer or topcoat?
No, this is an all-in-one formula designed to act as both a primer and a topcoat, simplifying the painting process.
How many coats should I apply?
For best results and a more durable finish, two coats are recommended. You may achieve coverage with one coat on some surfaces, but two coats are generally advised.
What is the coverage of a 500ml tin?
A 500ml tin covers up to 7m² with a single coat. With the recommended two coats, you can expect to cover approximately 3.5m².
Can I use this paint on radiators?
Yes, this paint is suitable for use on powder-coated radiators and other metal surfaces. Ensure the radiator is clean and dry before application.
Is this paint suitable for kitchen cabinets?
Yes, it is suitable for furniture, including kitchen cupboards, offering a durable and wipeable finish.
How long does it take to dry?
The paint is touch dry relatively quickly, but allow at least a few hours between coats. For full curing and maximum durability, allow approximately 7 days.
Can this paint be used outdoors?
No, this product is specifically formulated for interior use only.
Troubleshooting
Paint not adhering well
Ensure the surface was properly cleaned and free of contaminants. For glossy surfaces, ensure they were lightly abraded before painting. Stir the paint thoroughly.
Uneven finish or brush marks visible
Apply paint in thin, even coats. Use a good quality brush or roller suitable for water-based paints. Allow adequate drying time between coats.
Paint feels tacky after extended drying time
This can sometimes occur in humid conditions or if applied too thickly. Ensure good ventilation. If it persists after several days, consider a very light sanding and a further thin coat.
Coverage seems less than expected
The stated coverage is approximate and can vary based on surface porosity and application thickness. Two coats are recommended for optimal durability, which will affect the total area covered by a single tin.
Pros and Cons
Pros
- Simplifies the painting process with no need for separate primer or topcoat.
- Offers a durable and scuff-resistant finish.
- Low VOCs and low odour contribute to a healthier indoor environment.
- Suitable for a wide range of interior surfaces and furniture.
- EN71-3 certification ensures safety for children's items.
Cons
- Coverage estimates are based on a single coat, with two coats recommended for durability, effectively halving the coverage area.
- May require additional preparation on very glossy or non-porous surfaces for best adhesion.
- The soft-satin finish might not be preferred by those seeking a high-gloss look.
- Limited to interior use only.
Setup, Compatibility & Care
Setup:
- Ensure the surface is clean, dry, and free from dust, grease, and loose paint.
- Lightly abrade glossy surfaces to improve adhesion.
- Stir the paint thoroughly before use.
Compatibility:
- Suitable for: Interior woodwork (trims, skirting, doors), furniture (wood, laminate), powder-coated radiators, and metal.
- Not recommended for: Exterior surfaces, high-traffic floors, or areas of constant immersion.
Care:
- Allow paint to cure fully (typically 7 days for maximum durability) before rigorous cleaning.
- Clean surfaces with a damp cloth and mild soap if necessary.
- Avoid abrasive cleaners or harsh scrubbing, which can damage the finish.