Quest Double 12V Power Socket - Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Quest Double 12V Power Socket in Black is designed for drivers needing to power multiple standard 12V DC accessories from a single vehicle socket. Its primary benefit is expanding power access, allowing simultaneous use of devices like GPS units, dashcams, or phone chargers. A key consideration is its 5-amp fuse, which limits the total power draw of connected devices.
All features
| Colour | Black |
|---|---|
| Model Part Number | E033512 |
| Brand | Quest |
Extended Product Information
FAQs
What is the maximum amperage this adapter can handle?
The adapter is protected by a 5-amp fuse, which is the maximum combined amperage it can safely handle for all connected devices.
Can I use this with my 24V truck or camper?
No, this adapter is designed exclusively for 12V DC systems. Using it in a 24V system can cause damage to the adapter and your vehicle's electrical system.
How do I replace the fuse?
The fuse is typically located in a small compartment on the adapter's plug. You can usually open this compartment with a small tool (like a flathead screwdriver) and replace the blown fuse with a new 5-amp fuse. Ensure the replacement fuse is of the same type and rating.
Will this work with my phone charger and GPS?
Yes, standard phone chargers and GPS devices typically draw low amperage and can be used simultaneously, provided their combined draw is within the 5-amp limit.
What type of accessories are too powerful for this adapter?
Accessories that draw a high amount of power, such as portable tire inflators, small inverters, or high-wattage coolers, may exceed the 5-amp limit and cause the fuse to blow.
How long is the cable?
The cable length is 1 meter (approximately 3.3 feet).
Troubleshooting
No power to connected accessories
Check that the adapter is firmly plugged into the vehicle's 12V socket. Verify that the vehicle's 12V socket is functional by testing it with another device. Inspect the 5-amp fuse within the adapter for signs of being blown; if blown, replace it with a new 5-amp fuse.
One or both sockets not working intermittently
Ensure accessory plugs are fully inserted into the sockets. Check the 5-amp fuse for a loose connection or if it needs replacement. Lightly clean the contacts inside the sockets and on the accessory plugs.
Fuse blows frequently
The total power draw of your connected accessories is likely exceeding the 5-amp limit. Disconnect one accessory at a time to identify which device or combination is causing the overload. Replace the fuse with another 5-amp fuse and ensure you do not connect devices with a combined wattage that exceeds the rating.
Pros and Cons
Pros
- Increases the number of 12V accessories you can power simultaneously.
- Generous 1-meter cable length for flexible placement.
- Includes a built-in 5-amp fuse for device protection.
- Universal compatibility with standard 12V DC accessories.
- Simple plug-and-play operation.
Cons
- Total power draw is limited by the 5-amp fuse.
- Not suitable for high-power devices that exceed the fuse rating.
- Cable length may be insufficient for very large vehicles.
- Only converts one socket, not suitable if all sockets are already in use.
Setup, Compatibility & Care
Setup: Simply plug the adapter into any standard 12V DC vehicle socket. Ensure the connection is firm. Then, plug your 12V accessories into the two available sockets.
Compatibility: This adapter is compatible with all standard 12V DC accessories. It is important to check the power requirements of your accessories to ensure their combined load does not exceed 5 amps. It is not compatible with 24V systems.
Care: Keep the adapter clean and dry. Avoid exposing it to extreme temperatures or moisture. Periodically check the cable for damage. If the fuse needs replacement, use only a 5-amp fuse of the same type.