Revell Aqua Colour Acrylic Paint - Matt White (RAL 9001)
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Revell Aqua Color acrylic paint in Matt White (RAL 9001) is designed for model builders and hobbyists working with plastic kits. Its primary benefit is its water-based formula, offering a mild odor and non-flammable properties, making it safer for indoor use. A minor caveat is that it can only be thinned with water and not with other solvent-based mediums.
All features
| Model Part Number | 36105 |
|---|---|
| Brand | Revell |
Extended Product Information
FAQs
Can I mix Revell Aqua Color paints with other brands?
While it's generally recommended to use the same paint system for optimal results, Revell Aqua Color paints can sometimes be mixed with other water-based acrylics. However, compatibility is not guaranteed and testing on a small area is advised. They should not be mixed with solvent-based paints.
How long does the paint take to be fully dry?
The paint is typically fully dry within 2 to 3 hours, depending on environmental conditions like humidity and temperature.
Can I use this paint on models other than plastic?
Revell Aqua Color paints are specifically designed for plastic bodies and kits. While they may adhere to other surfaces, performance and durability might vary. Testing on an inconspicuous area is recommended.
Is this paint suitable for beginners?
Yes, the water-based formula, mild odor, and easy cleanup make it very user-friendly for beginners.
How should I clean my airbrush after using this paint?
Clean your airbrush immediately after use with water. If paint has dried, use Revell Airbrush Clean or Aqua Color Clean for effective removal.
What is the recommended thinning ratio for airbrushing?
The paint should not be diluted too much for airbrushing. Dilute with a maximum of 20 to 25% water or, preferably, Revell Aqua Color Mix.
Can I paint over old Revell Email Color enamels with this product?
Yes, you can overpaint existing Email Color enamel paints without difficulty, provided the enamel paint has dried completely according to its proper drying period.
Troubleshooting
Paint is too thick for airbrushing.
Thin the paint with 20-25% water or Revell Aqua Color Mix. Ensure thorough stirring.
Brush strokes are visible after painting.
Apply thinner, even coats. Allow adequate drying time between coats. Consider using a slightly larger brush or experimenting with thinning ratios.
Paint is drying too quickly in the airbrush.
Use Revell Aqua Color Mix to dilute the paint, as it acts as a retardant. Work in a well-ventilated area, but avoid direct drafts.
Paint is peeling or not adhering well.
Ensure the surface is properly prepared (clean, degreased). Check that the underlying paint layer (if any) is fully dry. Avoid over-diluting the paint.
Pros and Cons
Pros
- Low odor and non-flammable properties enhance user safety and comfort.
- Fast drying times speed up the modeling process significantly.
- Good coverage and smooth finish achievable with both brush and airbrush.
- Water-soluble for easy cleanup.
- Wide range of 88 available shades in the Aqua Color system.
- Can be used over dried enamel paints.
Cons
- Can only be thinned with water or specific Aqua Color Mix.
- Maximum dilution for airbrushing is limited to 20-25%.
- Cannot be mixed directly with Email Color enamel paints.
- Requires proper drying time before overpainting enamel bases.
Setup, Compatibility & Care
Setup:
- Ensure the model surface is clean and free from dust and grease.
- Stir the paint thoroughly before use to ensure an even consistency.
Compatibility:
- Compatible with all other Revell Aqua Color paints.
- Can be applied over properly dried Revell Email Color enamel paints.
- Not compatible for direct mixing with Revell Email Color enamel paints.
- Suitable for plastic models and kits.
Care:
- Brush Cleaning: Clean brushes immediately after use with water. If paint has dried, use Revell Airbrush Clean or Aqua Color Clean.
- Airbrush Cleaning: Clean the airbrush immediately after use with water. For dried paint, use Revell Airbrush Clean or Aqua Color Clean.
- Storage: Store in a cool, dry place away from direct sunlight. Ensure the lid is tightly closed to prevent drying.