Sealey Heat Shrink Push-On Male Terminal - BTSPM25
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Sealey BTSPM25 is a professional-grade 6.3mm male push-on terminal designed for automotive technicians, electricians, and DIY enthusiasts who require secure, moisture-resistant electrical connections. Its primary benefit is the integrated adhesive-lined heat shrink tubing that creates a robust, environmentally sealed joint, though users should note that a proper heat gun is required to activate the adhesive for optimal performance.
All features
| Model Part Number | BTSPM25 |
|---|---|
| Brand | Sealey |
Extended Product Information
FAQs
Are these terminals suitable for marine applications?
Yes, the adhesive-lined tubing provides a moisture-resistant seal that is beneficial for marine environments, though they should be placed in areas shielded from direct saltwater submersion.
Can I use a hair dryer to shrink these?
A hair dryer is generally not hot enough to activate the adhesive. A dedicated heat gun is recommended for a professional and secure finish.
What is the primary material of the terminal?
The terminal utilizes conductive metal internal components with a high-quality polyolefin heat-shrink outer shell.
Are they color-coded for specific sizes?
Yes, these are identified with a transparent blue finish, which corresponds to the industry-standard color coding for 16-14 AWG wire ranges.
How many units are in one package?
Each pack contains 25 individual male push-on terminals.
Troubleshooting
Tubing is not shrinking evenly
Ensure the heat source is moved in a circular motion around the terminal to avoid localized overheating and promote uniform shrinking.
Connection feels loose after crimping
Use a professional-grade ratcheting crimping tool specifically designed for insulated terminals to ensure enough pressure is applied to the metal barrel.
Adhesive is not sealing to the wire
Verify that you are using 16-14 AWG wire; if the wire gauge is too thin, the adhesive will not have a large enough surface area to bond correctly.
Pros and Cons
Pros
- Integrated moisture-resistant adhesive seal
- Easy visual inspection via transparent tubing
- High-vibration resistance for automotive use
- Standardized 6.3mm sizing for broad compatibility
Cons
- Requires a heat gun to activate the shrink feature
- Not suitable for high-amperage industrial power lines
- Permanent installation makes future component removal slightly more involved
Setup, Compatibility & Care
To install, strip approximately 6-8mm of insulation from your 16-14 AWG wire. Insert the wire into the metal barrel of the terminal and secure it using a high-quality crimping tool. Once the connection is mechanically sound, apply heat uniformly around the transparent tubing using a heat gun until the adhesive begins to flow and the tubing is tight against the wire insulation. Avoid using open flames, as they can burn the plastic and compromise the seal. Always ensure the wire is clean and free of oxidation before crimping to maintain low electrical resistance.