Showerwall Acrylic Wall Panel Pack - 2400x896 Deco Emerald - Square Edge
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Showerwall Acrylic Collection, specifically the Deco Emerald 2400x896mm panel pack, is designed for homeowners and renovators seeking a striking, modern accent wall in their bathrooms. Its key benefit is providing a vibrant, glass-like finish that is 100% waterproof and easy to clean, offering a bespoke design solution with fast installation. A notable consideration is the 3-4 week made-to-order lead time.
All features
| Model Part Number | SWACPKSCA8790 |
|---|---|
| Brand | Showerwall |
Extended Product Information
FAQs
What is the lead time for Showerwall Acrylic panels?
The Showerwall Acrylic Collection panels are made to order, and the typical lead time is 3-4 weeks from the order placement.
Can I install these panels myself?
Yes, the panels are designed for fast and easy installation. A comprehensive installation kit is provided, and detailed fitting guides are available to assist with DIY installation.
How do I clean the acrylic panels?
Clean the panels with a soft, damp cloth and a mild, non-abrasive cleaner. Avoid abrasive materials that could scratch the surface.
What is the guarantee period for these panels?
The panels come with a 30-year guarantee, provided they are installed correctly using the recommended accessories and fitting guide.
Do I need trims for these panels?
No, trims are not needed. The panels in this collection have square edges designed for seamless jointing or to fit into specific profiles without the need for separate trim pieces.
Can I fit these panels over existing tiles?
Yes, the panels can be fitted directly over existing tiles, provided the tiles are flat, sound, and well-adhered to the wall.
What is included in the installation kit?
Each panel now comes with a dedicated installation kit, including the correct amount of sealant for bonding and edge sealing, alcohol wipes for surface preparation, and sticky pads for temporary secure placement while the sealant cures.
Troubleshooting
Panel does not adhere well to the wall.
Ensure the wall surface was thoroughly cleaned and dried before application. Re-apply sealant and ensure consistent pressure is applied to the panel.
Visible gaps at the edges or joints.
Ensure the wall substrate is flat. Re-position the panel if possible, or ensure adequate sealant has been applied to the edges and joints to create a waterproof seal.
Surface appears dull or scratched.
Clean the surface with a soft cloth and mild soap. Avoid abrasive cleaners or pads. Minor scuffs may be buffed out with a specific acrylic polish, but deep scratches cannot be repaired.
Water ingress behind the panels.
This indicates a seal failure. Inspect all edges and joints. Re-seal any compromised areas using the recommended sealant and ensure water cannot penetrate.
Pros and Cons
Pros
- Provides a high-end, glass-like aesthetic at a competitive value.
- Significantly faster and cleaner installation compared to traditional tiling.
- 100% waterproof and easy to clean, reducing long-term maintenance.
- Can be installed directly over existing tiles, saving on removal costs and time.
- Durable and backed by a 30-year guarantee for longevity.
Cons
- Requires a 3-4 week lead time as panels are made to order.
- Acrylic can be susceptible to scratching if abrasive cleaning materials are used.
- Requires careful handling during installation to avoid damage.
- Specific adhesive and sealant recommended for warranty, limiting product choice.
Setup, Compatibility & Care
Setup:
- Ensure the wall surface is clean, dry, and free from dust or grease. Use the provided alcohol wipes for thorough preparation.
- Dry fit the panel to check alignment and ensure the pattern match, if applicable.
- Apply the recommended Showerwall sealant generously to the back of the panel or the wall surface as per the fitting guide.
- Use the provided sticky pads for instant adhesion and to hold the panel in place while the sealant cures.
- Press the panel firmly against the wall, ensuring full contact.
- Seal all edges and joints according to the installation guide to maintain the 100% waterproof integrity.
Compatibility:
- These panels are designed to be fitted directly over existing tiles (provided they are flat and well-adhered) or onto a clean, dry, and sound substrate like plasterboard or marine plywood battens.
- Trims are not required as the panels have square edges designed for seamless jointing or to fit into specific corner profiles.
- Always use the recommended Showerwall sealant and adhesive for optimal performance and to ensure the guarantee is valid.
Care:
- Clean the panels regularly with a soft, damp cloth and a mild, non-abrasive household cleaner.
- Avoid using abrasive cleaners, scouring pads, or harsh chemicals, as these can scratch or damage the polished acrylic surface.
- Wipe away any spills or residue promptly to maintain the pristine finish.