Holts Firegum Exhaust Assembly Paste - 75g
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for anyone needing to repair their exhaust system with a durable, gas-tight seal. Holts Firegum provides a strong, permanent fix for exhaust leaks, even in challenging situations. However, it's important to note that Firegum is best suited for joints and connections and may not always be sufficient for extensive damage. This product creates robust seals, resists vibration and heat, and is easy to apply.
All features
| Model Part Number | HOLFG6RA |
|---|---|
| Brand | Holts |
Extended Product Information
FAQs
How long does Holts Firegum take to cure?
Curing time varies depending on the product and environmental conditions. Refer to the packaging for specific instructions, typically, allowing the engine to run for a short period is recommended.
Can I use Holts Firegum on a new exhaust system?
Yes, Firegum can be used on new exhaust systems to seal joints and connections, preventing future leaks.
Is Holts Firegum resistant to high temperatures?
Yes, Holts Firegum is designed to withstand high exhaust temperatures, ensuring a durable seal.
What surfaces can I apply Holts Firegum to?
Holts Firegum can be applied to most exhaust system metals. Always clean the surface thoroughly before application.
How should I store Holts Firegum?
Store Holts Firegum in a cool, dry place, away from direct sunlight. Ensure the tube is properly sealed after use.
What safety precautions should I take when using Holts Firegum?
Wear appropriate gloves and eye protection. Avoid contact with skin and eyes. Ensure adequate ventilation when working in a confined space. Follow the product's safety instructions.
Can Holts Firegum be painted over?
It is generally not recommended to paint over Holts Firegum, as it may affect the sealant's performance. The product is designed to provide a seal on its own.
Troubleshooting
Exhaust leak persists after application
Ensure the application area was thoroughly cleaned and free of rust or debris. Reapply Firegum, ensuring complete coverage and proper assembly. Check for cracks or damage in the exhaust system.
Firegum is not hardening
Ensure the engine is run as per the instructions to allow the Firegum to cure. Check the product's expiry date. Ensure the ambient temperature is suitable for curing (as per the instructions).
Firegum appears to be cracking after application
Check if the exhaust system is subject to excessive movement or vibration. Reapply Firegum after addressing any issues with the exhaust mounting.
Pros and Cons
Pros
- Creates a strong, permanent seal.
- Easy to apply directly from the tube.
- Resists heat and vibration.
- Effective for sealing exhaust joints and connections.
- Helps to reduce exhaust noise.
Cons
- May not be suitable for repairing extensive exhaust system damage.
- Requires proper surface preparation for optimal adhesion.
- Effectiveness depends on the severity of the damage.
- Not a replacement for a complete exhaust system overhaul.
- Requires some mechanical skill for application.
Setup, Compatibility & Care
- Preparation: Ensure the exhaust system is cool before starting. Clean the area around the leak or joint with a wire brush or scraper to remove rust, dirt, and loose particles. Use a degreaser to remove any oil or grease.
- Application: Apply Holts Firegum directly from the tube to the affected area. Ensure complete coverage of the joint or connection. For larger gaps, apply a thicker layer.
- Assembly: Assemble the exhaust components immediately after applying Firegum. Tighten the clamps or bolts to the manufacturer's recommended torque specifications.
- Curing: Allow the Firegum to cure as per the product instructions, typically by running the engine for a short period. This activates and hardens the seal.
- Compatibility: Holts Firegum is compatible with most exhaust systems. Always check the product packaging for specific material compatibility guidelines.
- Care: Avoid washing the repaired area with high-pressure water immediately after application. Regularly inspect the repaired area for any signs of leaks or deterioration.