Tru-Tension Cycle Tungsten All Weather Lube
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Tru-Tension Cycle Tungsten All Weather Lube is for cyclists seeking superior drivetrain performance and durability across all conditions. Its key benefit is reduced wear and friction due to space-grade tungsten, leading to a quieter, faster, and longer-lasting chain. A potential caveat is the initial drying time required after application.
All features
| Model Part Number | Cycle Tungsten All Weather Lube |
|---|---|
| Brand | Tru-Tension |
Extended Product Information
FAQs
How often should I reapply the Tru-Tension Cycle Tungsten Lube?
Reapplication frequency depends on riding conditions. For dry, clean conditions, every 100-150 miles may suffice. In wet or dusty conditions, reapply more frequently, potentially after each significant ride or every 50-75 miles.
Can I use this lubricant on my gears and derailleurs?
Yes, while primarily designed for the chain, the lubricant can be applied to jockey wheels and other moving parts of the derailleur system for smoother operation.
Is this lubricant safe for my bike's components?
Yes, the formula is designed to be safe for all standard bicycle components and is biodegradable.
What makes tungsten better than ceramic or PTFE lubes?
Tungsten is a superior friction modifier that offers exceptional hardness and stability at high temperatures and pressures found in a bicycle chain. Independent tests show it reduces wear more effectively than ceramic or PTFE-based lubricants.
How do I know when the lubricant has dried?
The lubricant will change from a wet, shiny appearance to a matte, dry finish within 5-10 minutes. You should not feel any wetness or tackiness when touching the chain after it has dried.
Can I mix this lubricant with other chain lubes?
It is best to avoid mixing lubricants. For optimal performance and to maintain the properties of the Tungsten lube, thoroughly clean your chain before applying it.
Troubleshooting
Chain still noisy after application
Ensure the chain was thoroughly degreased before application. Re-clean the chain and reapply the lubricant, ensuring it dries completely.
Lubricant seems to wash off in wet conditions
Verify the lubricant has been allowed to dry for the full 5-10 minutes. If used immediately after application in wet conditions, it may not have set properly. Reapply and allow adequate drying time.
Chain feels sticky or attracts a lot of dirt
This indicates the lubricant may not have fully dried or the chain was not clean enough initially. Clean the chain thoroughly and reapply, ensuring the 5-10 minute drying period is respected. The dry finish should prevent further dirt adhesion.
Difficulty applying lubricant evenly
Shake the bottle vigorously before use to ensure the tungsten particles are suspended. Apply slowly while rotating the pedals backward for consistent coverage.
Pros and Cons
Pros
- Superior reduction in chain wear compared to other lubes.
- Significantly reduces drivetrain noise and friction.
- Effective in all weather conditions, both wet and dry.
- Keeps the chain exceptionally clean by preventing dirt build-up.
- Fast-drying and sets quickly for immediate use.
- Suitable for a wide range of cycling disciplines (Road, MTB, E-Bikes).
Cons
- Requires a clean drivetrain for optimal initial application.
- Needs a 5-10 minute drying period before riding.
- May require reapplication more frequently in extreme, prolonged wet conditions compared to some more permanent greases.
- Initial cost might be higher than basic chain lubes.
Setup, Compatibility & Care
Setup:
- Cleanliness is Key: Thoroughly degrease your bicycle chain, chainring, and cassette to remove all existing lubricant, dirt, and grime. A clean drivetrain is essential for the Tungsten lube to bond correctly.
- Shake Well: Before each use, shake the lubricant bottle vigorously to ensure the tungsten particles are evenly distributed.
- Even Application: Apply the lubricant evenly to all parts of the chain while rotating the pedals backward. Ensure full coverage.
- Allow to Dry: Let the lubricant dry completely for 5-10 minutes. The lube will change from a wet appearance to a dry finish. Do not ride the bike during this drying period.
Compatibility:
This lubricant is compatible with all types of bicycle drivetrains, including:
- Road bikes
- Mountain bikes (MTB)
- Hybrid bikes
- E-bikes
- Single-speed bikes
Care:
- Reapplication: Reapply as needed. For best results, reapply before or after rides that involve significant wet conditions or heavy dirt.
- Cleaning: The dry finish makes the chain easy to clean. A simple wipe with a clean cloth is often sufficient. If heavily soiled, re-degrease and reapply the lubricant.