Tikkurila Finngard Silicone Protect Facade Paint - Multicolor - 3L
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide helps homeowners and professionals use Tikkurila Finngard Silicone Protect effectively. This water-based masonry paint provides a smooth matt finish and protects exterior surfaces from moisture. While easy to apply, it's not recommended for surfaces previously coated with elastomeric coatings. This guide covers key features, performance, application, and troubleshooting to ensure optimal results.
All features
| Colour | Multicolor |
|---|---|
| Brand | Tikkurila |
Extended Product Information
FAQs
What surfaces can I use Tikkurila Finngard Silicone Protect on?
It is suitable for use on new and previously painted cement-rich renders, rendered fibre-cement boards, concrete, roughcast, pebbledash, cement, lime rendering, building blocks and boards, and mineral and dispersion coatings.
How long does it take for the paint to dry?
It is touch dry in approximately 2 hours and can be recoated after 8 hours.
Can I use this paint on surfaces previously coated with elastomeric coatings?
No, it is not recommended for use on surfaces previously coated with elastomeric coatings.
How do I apply the paint?
You can apply it by brush, spray, or roller.
Is the paint water-based?
Yes, it is a water-based paint.
Is Tikkurila Finngard Silicone Protect moisture vapor permeable?
Yes, it is highly moisture vapor permeable.
What is the finish of the paint?
It has a smooth matt finish.
Is the paint resistant to dirt?
Yes, it is resistant to dirt.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is properly prepared by cleaning and removing any loose particles. Apply a primer if necessary.
Color is not consistent.
Ensure thorough mixing of the paint before application. Apply an even coat and avoid applying too thinly.
Paint is cracking.
Ensure the paint is compatible with the surface. Check the drying time and avoid applying too thick of coats.
Pros and Cons
Pros
- Excellent moisture protection due to its hydrophobic properties.
- Breathable coating that allows moisture to escape.
- Easy application with brush, spray, or roller.
- Durable and long-lasting finish.
- Available in a wide range of colors.
Cons
- Not suitable for surfaces previously coated with elastomeric coatings.
- Requires proper surface preparation for best results.
- Recoat time of 8 hours may require careful planning.
- Color matching may be needed if more paint is required.
- The volume in the can is 10% less than the unit of measure to allow for tinting.
Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from loose particles, dirt, and previous coatings. Any existing mold or mildew should be removed.
- Application: Apply by brush, spray, or roller. Two coats are recommended for optimal performance.
- Drying Time: Touch dry in approximately 2 hours. Allow at least 8 hours between coats.
- Compatibility: Suitable for new and previously painted cement-rich renders, rendered fibre-cement boards, and concrete surfaces. Not recommended for use on surfaces previously coated with elastomeric coatings.
- Care: Clean tools with water immediately after use. Regular cleaning of the painted surface with water will help maintain its appearance.