Anker SOLIX C2000 Gen 2 Portable Power Station - Grey

The Anker SOLIX C2000 Gen 2 Portable Power Station offers versatile and fast recharging with six w...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

The Anker SOLIX C2000 Gen 2 is designed for users needing a powerful, fast-charging, and portable power solution for off-grid adventures, emergencies, or mobile workspaces. Its key benefit is rapid recharging and high output capacity in a compact design. A potential caveat is that solar panels are shipped separately, requiring an additional purchase and coordination for solar charging setups. This power station offers versatile recharging options, substantial power output for multiple devices, and expandable battery capacity, all within a surprisingly lightweight and compact form factor.

All features

ColourGrey
SeriesSOLIX
Model Part NumberC2000 Gen 2
BrandAnker SOLIX

Extended Product Information

FAQs

How long does it take to fully charge the C2000 Gen 2 via AC?

The Anker SOLIX C2000 Gen 2 can be fully charged in approximately 58 minutes using an AC power source.

Can I power my RV air conditioner with this unit?

The C2000 Gen 2 has a peak output of 4,000W and a rated output of 2,400W. It can power *most* RV air conditioning units, but it's recommended to check the specific wattage requirements of your AC unit.

How do I expand the battery capacity?

Battery capacity can be expanded up to 4kWh by connecting an additional compatible Anker SOLIX battery (sold separately) to the power station.

Are solar panels included with the C2000 Gen 2?

No, the solar panels are not included in the standard package and must be purchased separately.

What is the warranty period for the C2000 Gen 2?

Please refer to the warranty card included in the package for the specific warranty period and terms. Typically, Anker products come with a multi-year warranty.

How can I use it to charge my car?

The C2000 Gen 2 features ultra-fast alternator charging, providing 800W to charge the power station itself from a car in 2.6 hours. It is not designed to charge electric vehicles.

What is the standby power consumption?

The power station is designed for efficiency and consumes as little as 9W when in standby mode.

Troubleshooting

Power station does not turn on.

Ensure the power station is charged. Press and hold the power button for 3 seconds. If it still does not turn on, contact customer support.

AC outlets are not providing power.

Check if the AC output is enabled. Verify that the total wattage of connected devices does not exceed the rated output (2,400W). Overload protection may have tripped; turn off AC output and reconnect.

Charging speed is slower than expected.

Ensure the charging source (AC adapter or solar panel) is functioning correctly and providing sufficient power. Clean any debris from charging ports. If using solar, ensure panels are optimally positioned and receiving direct sunlight.

Device overheats during use.

Ensure the unit's vents are unobstructed. Avoid using the power station in direct sunlight or excessively hot environments. If overheating persists, turn off the unit and allow it to cool down.

Battery does not hold a charge.

Contact Anker SOLIX customer support. This may indicate a battery issue requiring professional assessment or replacement.

Pros and Cons

Pros

  • Extremely fast AC charging time.
  • Significant power output for demanding appliances.
  • Compact and lightweight for its capacity.
  • Expandable battery system for longer use.
  • Efficient low-power standby mode.

Cons

  • Solar panels are not included and must be purchased separately.
  • Expandable battery is an additional cost.
  • May not be suitable for extremely high-wattage continuous loads beyond its peak rating.
  • Requires careful management of power draw to maximize runtime for essential appliances.

Setup, Compatibility & Care

Setup:

  1. Unbox the C2000 Gen 2 Portable Power Station, AC charging cable, and documentation.
  2. Ensure the unit is placed on a stable, level surface.
  3. Connect the AC charging cable to the power station and a wall outlet to begin charging.
  4. For solar charging, connect compatible solar panels (sold separately) to the designated solar input port, following both product manuals.

Compatibility:

  • The C2000 Gen 2 is designed to power a wide range of AC and USB-powered devices within its 2,400W rated output. Consult your appliance's wattage requirements to ensure compatibility.
  • Compatible with Anker SOLIX accessories, including additional batteries (sold separately).
  • Refer to the user manual for specific solar panel compatibility.

Care:

  • Store the power station in a cool, dry environment, away from direct sunlight and extreme temperatures.
  • Avoid exposing the unit to water or excessive moisture.
  • Clean the exterior with a soft, damp cloth. Do not use abrasive cleaners.
  • Periodically check for any debris around the vents to ensure proper airflow.
  • Recharge the unit regularly, even if not in use, to maintain battery health (e.g., every 3-6 months to at least 50%).