Gorilla Contact Adhesive Clear - 75g - 24 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Gorilla Contact Adhesive Clear is an essential solution for professional contractors, hobbyists, and DIY enthusiasts who require a high-strength, permanent bond on diverse materials. Its primary advantage is its ability to create an instant, moisture-resistant hold that dries completely clear, keeping finished projects looking clean and professional. However, because it is a true contact cement, it requires careful alignment before pressing the surfaces together, as the bond is immediate and difficult to reposition once contact is made.
All features
| Brand | Gorilla |
|---|
Extended Product Information
FAQs
Can this be used on outdoor projects?
Yes, the formula is waterproof, making it suitable for exterior items provided the surfaces are clean and the bond is allowed to cure properly.
Does it work on all plastics?
It is compatible with many plastics, but due to the variety of plastic compositions, it is recommended to test on a small area first.
How do I remove excess adhesive?
While fresh, it can be wiped away with a suitable solvent. Once fully cured, it is very difficult to remove without damaging the underlying material.
Is this safe for food-contact surfaces?
No, this adhesive is not rated for food-contact applications.
How long does it take to fully cure?
While the initial bond is instant upon contact, we recommend allowing the bond to sit for 24 hours to achieve maximum strength.
Troubleshooting
Adhesive is not sticking well.
Ensure both surfaces were coated and allowed to dry until tacky before pressing them together; if the glue was too wet, the bond may fail.
Glue is stringy or wet.
Wait a few extra minutes; the solvent needs more time to evaporate for the 'tacky' phase to be reached.
Difficulty separating surfaces for realignment.
This is expected behavior for contact cement; use a thinner layer next time to control the initial grab or use guide spacers to assist with alignment.
Pros and Cons
Pros
- Dries clear for a clean, professional finish
- Excellent resistance to moisture and water
- Versatile application across many different materials
- Quick tack reduces waiting time during assembly
- Bulk pack is cost-effective for frequent users
Cons
- Requires precise alignment as the bond is near-instant
- Strong odor requires use in well-ventilated areas
- Not intended for applications requiring structural load-bearing flexibility
- Requires application to both surfaces for best results
Setup, Compatibility & Care
For best results, work in an environment with good ventilation to allow solvents to evaporate safely. Before applying, test a small, inconspicuous area if you are working with unknown plastics to ensure compatibility. To store, ensure the caps are tightly secured after each use to prevent the adhesive from drying out inside the tube. Store the tubes in a cool, dry place away from direct heat or open flames. Keep the nozzle free of dried residue by wiping it clean with a dry cloth immediately after use.