Treatex Preparation Cleaner 1170 - 1 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This Treatex Preparation Cleaner is designed for woodworkers and DIY enthusiasts looking to efficiently prepare wooden surfaces before applying Treatex Hard Wax Oil or refreshing existing Treatex wax polish finishes. Its key benefit is its aggressive cleaning action that removes old wax and prepares worn surfaces, but users should be aware it is a potent cleaner and requires proper ventilation and protective gear.
All features
| Model Part Number | 9210943 |
|---|---|
| Brand | Treatex |
Extended Product Information
FAQs
What is the primary purpose of Treatex Preparation Cleaner?
Its primary purpose is to aggressively clean and prepare wooden surfaces that have been previously finished with Treatex Hard Wax Oil, making them ready for re-application or refinishing with Treatex wax polishes.
Can I use this cleaner on any type of wood finish?
It is specifically designed for surfaces finished with Treatex Hard Wax Oil. While it can be used to refresh Treatex wax polish, using it on other types of finishes is not recommended without thorough testing in an inconspicuous area, as it may be too aggressive.
How long does the cleaner need to dry before applying Treatex Hard Wax Oil?
The cleaner needs to fully evaporate from the surface. This typically takes about 15-30 minutes, but can vary depending on temperature, humidity, and ventilation. Ensure the surface is dry to the touch and free from any solvent smell before proceeding.
Is ventilation important when using this product?
Yes, very important. The cleaner has strong fumes due to its aggressive formulation. Always use it in a well-ventilated area and consider wearing a respirator.
Does this cleaner remove all types of stains?
This cleaner is designed to remove old wax and prepare the surface. It is not a general-purpose stain remover for deep-set stains like ink or paint. For such issues, other wood preparation methods may be required.
What safety precautions should I take?
Wear chemical-resistant gloves and safety glasses. Ensure adequate ventilation. Avoid breathing fumes and keep away from open flames or sparks.
How does this cleaner differ from Treatex Refreshment Cleaner 1170?
This Preparation Cleaner 1170 is the direct replacement for the previous Refreshment Cleaner 1170 and offers the same aggressive cleaning action for worn Treatex Hard Wax Oil surfaces.
Troubleshooting
Surface remains sticky after cleaning.
Ensure the cleaner has fully evaporated before applying the next Treatex product. If residue persists, wipe with a clean, lint-free cloth and allow to dry completely.
Uneven finish after applying Treatex oil.
This could be due to insufficient cleaning or the presence of contaminants. Ensure the surface was thoroughly cleaned and fully dry before applying the oil. Re-clean the affected area if necessary.
Strong fumes in the work area.
Increase ventilation by opening more windows or using additional fans. Wear a respirator if fume levels are high.
Cleaner appears to be damaging the wood.
This cleaner is aggressive. If you are not working on a surface previously treated with Treatex Hard Wax Oil, test in an inconspicuous area first. Ensure you are not over-applying or leaving the cleaner on for too long.
Pros and Cons
Pros
- Effectively cleans and prepares wood for Treatex oil finishes.
- Restores the look of worn wax-polished surfaces.
- Strong cleaning power ensures a good base for new finishes.
- Direct replacement for a previously available product, maintaining consistency.
- Sufficient volume for various woodworking projects.
Cons
- Requires good ventilation due to its aggressive nature.
- May require protective gloves and eyewear during use.
- Not suitable for general-purpose wood cleaning; specific to Treatex systems.
- Can be too harsh for delicate or unfinished woods if not used carefully.
Setup, Compatibility & Care
Setup:
- Ensure the work area is well-ventilated. Open windows or use fans.
- Wear appropriate personal protective equipment (PPE), including chemical-resistant gloves and safety glasses.
- Shake the container well before use.
Compatibility:
- Primarily designed for use with Treatex Hard Wax Oil and Treatex Wax Polish.
- Suitable for use on worn surfaces previously finished with Treatex Hard Wax Oil.
- Not recommended for use on raw, unfinished, or other types of finishes without prior testing.
Care:
- Store the cleaner in its original, tightly sealed container in a cool, dry place, away from direct sunlight and sources of ignition.
- Clean application tools immediately after use with a suitable solvent.
- Dispose of waste materials and empty containers according to local regulations.