HP 1GB DDR2 SDRAM PC2-6400 Memory Module SO DIMM 200-pin - KT292ET
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This HP 1GB DDR2 SDRAM memory module (KT292ET) is designed for laptop users seeking a straightforward performance boost. Its key benefit is faster multitasking and application response times by upgrading your system's RAM. A potential caveat is that it's a specific DDR2 technology, limiting its compatibility to older systems that support this type of memory.
All features
| Model Part Number | KT292ET |
|---|---|
| Brand | HP |
Extended Product Information
FAQs
What is the primary benefit of installing this HP memory module?
The primary benefit is improved system performance, allowing for smoother multitasking and faster application response times, especially on laptops that are under-resourced with RAM.
Is this memory module compatible with all laptops?
No, this is a DDR2 SO DIMM module. It is only compatible with laptops that specifically support DDR2 memory technology. Always check your laptop's specifications before purchasing.
How do I know if my laptop supports this memory upgrade?
Consult your laptop's user manual or the manufacturer's website for its memory specifications. Look for support for DDR2 SDRAM SO DIMM modules at 800MHz.
What does 'PC2-6400' mean?
'PC2-6400' is a designation for DDR2 memory that indicates its transfer rate, equivalent to 6400 MB/s. It is also related to its clock speed of 800MHz.
Can I mix this module with existing RAM?
You can often mix RAM modules, but it's best if they have similar specifications (type, speed, timings) for optimal performance. Ensure your system supports the total combined RAM capacity.
What is the warranty period for this product?
This product comes with a 1-year warranty.
Are there any software installations required for this memory module?
No, memory modules are hardware components. Once physically installed correctly in a compatible laptop, the operating system should automatically detect and utilize the additional memory without any software installation.
Troubleshooting
Laptop does not boot or shows errors after installation
Ensure the memory module is fully seated in the slot. Re-check compatibility with your laptop model. Try installing the original module to confirm the system still boots.
System does not recognize the full 1GB of new memory
Verify that your laptop's BIOS/UEFI supports the amount of RAM installed. Check the laptop's maximum supported RAM capacity and configuration. Ensure the module is correctly seated.
Intermittent system instability or crashes
Reseat the memory module to ensure a solid connection. Test the module in a different compatible laptop if possible. Run memory diagnostic tools provided by your operating system or third-party software.
Pros and Cons
Pros
- Significantly improves multitasking capabilities for older laptops.
- Can speed up application loading and overall system responsiveness.
- Extends the usable life of compatible laptops by enhancing performance.
- Tested and verified for functional reliability.
- Backed by a 1-year warranty for peace of mind.
Cons
- Limited to laptops supporting DDR2 memory technology.
- 1GB is a modest capacity by modern standards.
- May require opening the laptop for installation, which can be complex for some users.
- Performance gains are dependent on the existing system configuration.
- Not suitable for systems requiring DDR3 or newer memory standards.
Setup, Compatibility & Care
Compatibility:
This HP KT292ET module is a DDR2 SDRAM SO DIMM with a 200-pin connector and operates at 800MHz (PC2-6400). It is designed for laptop use and is system-specific. Always consult your laptop's manual or manufacturer's specifications to confirm compatibility with DDR2 SO DIMM memory before purchasing. It is not compatible with systems requiring DDR3 or newer memory types.
Installation:
- Power Down: Ensure your laptop is completely powered off and disconnected from the power adapter.
- Ground Yourself: Touch a metal surface to discharge static electricity.
- Access Memory Slot: Locate the memory compartment on your laptop (often on the underside). This may require removing a small panel or the entire bottom cover.
- Remove Old Module (if applicable): Gently release the clips holding the existing module in place and carefully slide it out.
- Insert New Module: Align the notch on the new memory module with the notch in the slot. Press down firmly and evenly on both ends until the module clicks into place and the retention clips secure it.
- Reassemble: Replace the compartment cover or bottom panel.
- Power On: Reconnect the power adapter and turn on your laptop. The system should automatically detect the new memory.
Care:
- Handle the memory module by its edges to avoid touching the gold contacts.
- Store in a dry, anti-static environment when not in use.
- Avoid exposing the module to extreme temperatures or moisture.