G.Skill Ripjaws S5 - 64 GB (2 x 32 GB) - DDR5 6000MHz - CL30
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The G.Skill Ripjaws S5 64GB DDR5 memory kit is a premium high-performance solution designed for enthusiasts, gamers, and content creators who require significant memory overhead for multitasking and demanding applications. Offering a tight CAS latency of 30 and a high clock speed of 6000 MHz, it provides a substantial performance boost for modern Intel-based platforms, though users must manually enable XMP 3.0 in their BIOS to achieve these advertised speeds.
All features
| Series | Ripjaws |
|---|---|
| Model Part Number | F5-6000J3040G32GX2-RS5K |
| Brand | G.Skill |
Extended Product Information
FAQs
Does this kit work with AMD processors?
While optimized for Intel platforms, it may work with AMD systems; however, you should check your motherboard's QVL (Qualified Vendor List) to ensure compatibility.
What is the difference between SPD speed and XMP speed?
SPD speed (4800 MHz) is the universal standard for stability on initial boot. XMP speed (6000 MHz) is the high-performance overclocked setting that requires manual activation.
Do I need special cooling for this RAM?
No, the integrated aluminum heatspreaders are designed to dissipate heat effectively under normal and heavy gaming loads.
Will this fit in my Mini-ITX build?
Yes, its low-profile 33mm height is specifically designed to fit into space-constrained builds like Mini-ITX systems.
Can I save custom settings to the RAM?
Yes, Intel XMP 3.0 allows you to save two user-defined profiles directly onto the memory modules via your motherboard's BIOS.
Troubleshooting
System does not reach 6000 MHz clock speed
Access the BIOS and ensure that the Intel XMP 3.0 profile is enabled. The system will default to 4800 MHz if this is not manually set.
Computer fails to boot after enabling XMP
Your motherboard or CPU memory controller may not support the higher frequency. Try updating your BIOS to the latest version or manually lower the frequency slightly until stable.
Memory is not detected or system gives memory error beeps
Remove the modules and ensure they are fully seated in the RAM slots. Try testing one stick at a time to identify if a specific slot or module is problematic.
Pros and Cons
Pros
- Excellent balance of high speed (6000 MHz) and low latency (CL30)
- Compact 33mm height ensures compatibility with large CPU coolers
- Easy one-click performance tuning via Intel XMP 3.0
- Substantial 64GB capacity for professional-grade productivity tasks
Cons
- Requires manual XMP enablement in BIOS to hit 6000 MHz speeds
- Performance is dependent on motherboard and CPU capability
- SPD speed defaults to 4800 MHz for compatibility
Setup, Compatibility & Care
Installation is straightforward as this is an unbuffered DDR5 module set. To install, ensure your PC is powered off and unplugged. Insert the modules into the 2nd and 4th slots from the CPU for standard dual-channel operation on most motherboards.
Upon first boot, the memory will default to the standard SPD speed of 4800 MHz. To reach the rated 6000 MHz, enter your BIOS, locate the XMP settings, and enable the 'Profile 1' or 'Profile 2' XMP 3.0 settings. As a precaution, keep the system environment free of excessive dust to prevent the heatspreaders from losing their thermal efficiency. Since this kit operates at 1.4V, ensure your PC case has adequate airflow.