Montana Colors MTN 94 Spray Paint - Black - 400ml - RV-9011
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Montana Colors MTN 94 Spray Paint is an ideal choice for muralists, street artists, and DIY enthusiasts who require professional-grade precision and reliable coverage. Its primary benefit is the unique low-pressure system and soft valve, which allows for unparalleled control over paint flow and line width. However, users should note that as a solvent-based enamel, it requires a well-ventilated space for safe application due to its chemical composition.
All features
| Model Part Number | RV-9011 |
|---|---|
| Brand | Montana Colors |
Extended Product Information
FAQs
Can I use this paint indoors?
It is not recommended for indoor use unless there is exceptional cross-ventilation, as the solvent-based fumes can be strong.
Do I need to prime the surface first?
For best results, especially on smooth, non-porous, or highly porous surfaces, a dedicated primer will improve adhesion and longevity.
Is this paint UV resistant?
Yes, MTN 94 is known for its high-quality pigments that offer excellent resistance to UV light and weathering.
Can I change the nozzle to get different effects?
Yes, the MTN 94 is compatible with a wide range of standard female-valve caps, allowing you to experiment with different spray patterns.
How do I remove paint from my hands?
Use a heavy-duty hand cleaner or soap and warm water immediately. Avoid using harsh solvents directly on your skin.
Troubleshooting
The spray nozzle is clogging mid-use
Remove the cap and soak it in a solvent cleaner or replace it with a fresh nozzle from your kit.
Paint is dripping or running
You are applying too much paint in one spot; hold the can further from the surface and use faster, lighter passes.
Rough or dusty finish
This is often caused by spraying from too far away, causing the paint to dry before it hits the surface. Move closer to the object.
Pros and Cons
Pros
- Exceptional flow control for high-detail work
- Fast-drying formula reduces the risk of drips
- Highly opaque coverage on a single pass
- Soft valve is easy on the fingers during extended use
Cons
- Requires well-ventilated environment due to solvent base
- Not intended for food-contact surfaces
- Requires careful shaking to ensure pigment consistency
Setup, Compatibility & Care
To ensure optimal results, shake the can vigorously for at least one minute after hearing the mixing ball move freely. Before spraying your primary surface, always perform a test spray on a scrap piece of cardboard to ensure the nozzle is clear and the paint flow is consistent.
Compatibility: This paint adheres best to clean, dry, and grease-free surfaces. While it works on many plastics, a plastic primer is recommended for non-porous synthetic materials.
Care: To prevent the nozzle from clogging, always turn the can upside down after finishing your session and spray for a few seconds until the aerosol output runs clear. Store in a cool, dry place away from direct sunlight to maintain the integrity of the resin.