Switzer Pressure Washer - 7HP Petrol

This 7HP petrol-powered pressure washer is designed to tackle the toughest outdoor cleaning tasks ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Similar alternatives

Product Information

Full details

This 7HP petrol pressure washer is designed for users needing to tackle tough outdoor cleaning tasks. Its key benefit is delivering up to 2200 PSI from a robust 210cc engine, making light work of driveways, patios, and vehicles. A potential caveat is its petrol power, requiring fuel and maintenance. Key features include a powerful engine, a convenient hose reel, five interchangeable nozzles, and a portable trolley design.

All features

Model Part NumberB678-038
BrandSwitzer

Extended Product Information

FAQs

What type of petrol should I use?

Use fresh, unleaded petrol. Avoid using old fuel, as it can cause starting problems and affect engine performance.

How often should I change the engine oil?

Refer to the product manual for the specific oil change interval. Generally, it's recommended after the initial break-in period and then at regular intervals based on usage hours.

Can I use this pressure washer with any garden hose?

Yes, it is compatible with standard garden hoses, but ensure the hose is of adequate diameter and condition to supply sufficient water flow to the machine. A kink-free hose is recommended.

What is the maximum water pressure?

The Switzer pressure washer delivers up to 2200 PSI of water pressure.

How do I select the right nozzle for the job?

The included colour-coded nozzles typically correspond to different spray angles: Red (0°) for intense spot cleaning, Yellow (15°) for tough grime, Green (25°) for general cleaning, White (40°) for rinsing surfaces, and Black (soap/detergent) for applying cleaning solutions.

Is this pressure washer suitable for delicate surfaces like car paint?

While powerful, it can be used on car paint by maintaining a safe distance, using a wider nozzle (like the 40° or 25°), and avoiding direct, prolonged spraying on one spot. Always test in an inconspicuous area first.

Do I need to do anything special for winter storage?

Yes, it is recommended to drain all water from the pump and hoses to prevent freezing and damage. Draining the fuel tank or using a fuel stabilizer is also advisable if storing for an extended period.

Troubleshooting

Engine won't start

Check fuel level, ensure fresh petrol is used, verify spark plug is connected, and check the on/off switch is in the 'on' position. Ensure water supply is connected and turned on.

Low water pressure

Ensure water supply is fully turned on and the hose is not kinked. Check that the water inlet filter is clean. Verify the correct nozzle is attached and not blocked. Ensure engine is running at optimal RPM.

Engine sputters or runs rough

Check air filter for dirt or blockages. Ensure fresh fuel is being used. Inspect the spark plug for fouling or damage. Consult the manual for specific engine troubleshooting steps.

Hose leaks

Check all connections for tightness. Inspect the high-pressure hose for damage or wear. Replace O-rings or seals if they appear worn or damaged.

Detergent not being drawn

Ensure the correct detergent nozzle (if applicable) is used. Check that the detergent filter/tube is clean and submerged in the detergent. Verify the machine is configured for detergent application.

Pros and Cons

Pros

  • High-pressure output (2200 PSI) for effective cleaning.
  • Powerful 7HP petrol engine handles tough grime.
  • Includes multiple nozzle options for versatility.
  • Built-in hose reel for convenient storage and use.
  • Portable design with wheels and handle for easy maneuverability.

Cons

  • Requires petrol fuel and regular engine maintenance.
  • Petrol engine noise can be significant.
  • May be heavier than electric alternatives.
  • Not suitable for indoor use due to exhaust fumes.
  • Initial setup may require some assembly.

Setup, Compatibility & Care

Setup:

  1. Ensure the unit is on a stable, level surface before starting.
  2. Connect the water inlet hose to a suitable water source. Turn on the water supply.
  3. Attach the desired quick-change nozzle to the spray gun.
  4. Check the engine oil level and add the appropriate type if necessary.
  5. Add fresh petrol to the fuel tank.
  6. Follow the engine's starting procedure (usually involving choke and pull-start).

Compatibility:

  • Water Source: Requires a standard garden hose connection and a consistent water supply (minimum flow rate recommended by manufacturer, typically around 2.5 GPM).
  • Fuel: Use fresh, unleaded petrol.
  • Oil: Consult the manual for recommended engine oil type and quantity.

Care:

  • After Use: Flush the system with clean water. Turn off the engine and disconnect the water supply.
  • Engine Maintenance: Regularly check and change the engine oil, clean or replace the air filter, and inspect the spark plug as per the manufacturer's recommendations.
  • Storage: Store the pressure washer in a dry, protected area. Drain the fuel tank if storing for extended periods to prevent gumming.
  • Nozzle Care: Clean nozzles regularly to prevent blockages.