ISOPON Metal Fix 250ml - U-POL MTFX/S
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the ISOPON Metal Fix 250ml. It helps in repairing deep to medium depth panel damage on metal surfaces. The key benefit is its ability to fill and bond with the same product, offering a durable and water-resistant finish. Note that while it's versatile, it requires proper preparation of the metal surface for optimal adhesion.
All features
| Model Part Number | MTFX/S |
|---|---|
| Brand | U-POL |
Extended Product Information
FAQs
What surfaces can I use ISOPON Metal Fix on?
ISOPON Metal Fix is suitable for use on all metal surfaces, including steel, aluminum, and alloys.
Is ISOPON Metal Fix waterproof?
Yes, ISOPON Metal Fix is water-resistant, making it suitable for exterior repairs.
How do I prepare the metal surface before applying the filler?
Clean the metal surface thoroughly to remove any rust, grease, or paint. Sand the area around the damage to provide a good key for the filler.
What is the coverage of the ISOPON Metal Fix?
The coverage is 560cm at a 3.5mm depth.
Can I paint over ISOPON Metal Fix?
Yes, you can paint over ISOPON Metal Fix once it has fully cured and been properly sanded.
How should I store ISOPON Metal Fix?
Store the product in a cool, dry place. Ensure the lid is securely closed after each use to prevent hardening.
What is the temperature resistance of ISOPON Metal Fix?
ISOPON Metal Fix is resistant to temperatures up to 120°C.
What should I use to clean my tools after using the product?
Clean tools immediately after use with a suitable solvent.
Troubleshooting
Filler is not adhering to the metal surface.
Ensure the metal surface is properly cleaned, degreased, and sanded to provide a key for the filler. Check for any remaining rust and remove it.
Filler is taking too long to cure.
Check the mixing ratio of the filler and hardener. Ensure that the product is stored at the correct temperature as extreme temperatures can affect the curing process.
Filler is cracking after application.
Make sure you are not applying the filler in too thick of a layer. Apply in thin layers, allowing each to partially cure before applying the next.
Difficulty sanding the filler.
Ensure that the filler is fully cured before sanding. Use appropriate sandpaper grades, starting with a coarser grit and finishing with a finer grit.
Pros and Cons
Pros
- Versatile for use on multiple metal surfaces.
- Easy to shape and sand for a smooth finish.
- Water, oil, and chemical resistant for long-lasting repairs.
- Offers excellent adhesion due to its aluminum content.
- High-density filler ensures effective filling of damage.
Cons
- Requires proper surface preparation for optimal adhesion.
- Coverage is limited to 560cm at a 3.5mm depth.
- May require multiple applications for very deep damage.
Setup, Compatibility & Care
- Preparation: Clean the metal surface thoroughly to remove any rust, grease, or paint. Use a suitable degreaser for best results. Sand the area around the damage to provide a good key for the filler.
- Mixing: Mix the two-part polyester paste according to the manufacturer's instructions, ensuring a uniform consistency.
- Application: Apply the mixture to the damaged area using a spreader. Build up the layers as needed, allowing each layer to partially cure before applying the next.
- Curing: Allow the filler to fully cure according to the product specifications. This typically takes a short amount of time, check the packaging for the exact time.
- Sanding: Once cured, sand the filler to match the original contours of the panel.
- Compatibility: ISOPON Metal Fix is compatible with all metal surfaces, including steel, aluminum, and alloys. It is also compatible with most automotive paints after proper preparation.
- Care: Store the product in a cool, dry place. Ensure the lid is securely closed after each use to prevent hardening. Clean tools immediately after use with a suitable solvent.