Internal Wall Panel End U Trim - 2400mm Black
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Guardian Internal Wall Panel End U Trim is designed for DIY enthusiasts and professional contractors looking to achieve a professional, clean edge on internal wall cladding projects. By capping off raw panel edges, this trim provides a seamless, aesthetically pleasing finish while protecting the panel core from wear, though users should ensure their wall panel thickness is compatible with the trim's channel width before purchase.
All features
| Model Part Number | PICUTB10 |
|---|---|
| Brand | Guardian |
Extended Product Information
FAQs
Can this trim be used outdoors?
No, this product is specifically designed and rated for internal wall cladding applications.
What is the length of this trim?
Each piece is 2400mm long.
Do I need screws to attach it?
Typically, these trims are friction-fitted or held in place with a small amount of grab adhesive, meaning screws are generally not required.
Is the finish matte or gloss?
The black trim provides a modern, neutral finish that complements most contemporary panel designs.
How do I cut the trim to size?
A fine-toothed hacksaw or a miter saw with a plastic-cutting blade is recommended for a clean, square cut.
Troubleshooting
Trim feels loose on the panel edge
Apply a thin bead of silicone or panel adhesive inside the trim channel before fitting to secure it permanently.
Trim is too long for the wall
Mark the required length accurately and use a fine-tooth hacksaw to trim the excess; file the cut edge smooth for a better fit.
Pros and Cons
Pros
- Provides a clean, professional finish to panel edges
- Protects the exposed internal core of the cladding
- Durable and long-lasting material
- Standardized 2400mm length minimizes need for joints
Cons
- Specific to internal cladding panels only
- Requires precise measurement for accurate cutting
- Limited to the black color variant
Setup, Compatibility & Care
To install, measure the height of your panel and cut the trim to length using a fine-toothed hacksaw. Ensure the cut is clean to avoid jagged edges. Once cut, you can apply a small bead of high-strength grab adhesive inside the channel before pressing it firmly onto the panel edge. Ensure the panel thickness is fully compatible with the trim’s internal gap to avoid a loose fit. For maintenance, clean the trim periodically with a damp, non-abrasive cloth to remove dust and prevent water buildup.