The Soho Lighting Company Euromodule 45W Max Charger - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users seeking a versatile and powerful charging solution that integrates seamlessly into custom wall plates. The Soho Lighting Company Euromodule 45W charger offers super-fast charging with USB Power Delivery (USB PD) via both USB-A and USB-C ports, allowing for rapid device replenishment. A key caveat is that total power is shared when both ports are in use, and it's exclusively compatible with specific Euro Module plate systems. This compact, silk white unit enhances both functionality and aesthetics.
All features
| Colour | White |
|---|---|
| Series | Euromodule |
| Model Part Number | SS-SH-05-EMD422-WT |
| Brand | The Soho Lighting Company |
Extended Product Information
FAQs
What is the total maximum power output?
The charger has a maximum total power output of 45W. This power is shared between the USB-A and USB-C ports when both are in use.
Can I charge two devices at full speed simultaneously?
The 45W total power will be divided between the two ports when used simultaneously. The exact power each port receives depends on the charging requirements of the connected devices and the charger's internal power management.
What type of devices can I charge?
You can charge any device that uses a USB-A or USB-C connection for charging. Devices that support USB Power Delivery (USB PD) will benefit from faster charging speeds.
What plates is this module compatible with?
This module is compatible exclusively with The Soho Lighting Company's Euro Module EM Floor and Wall Plates. It is not compatible with RM, CM, LT1, LT2, or LT3 plates.
How do I clean the charger module?
Use a soft, dry cloth for routine cleaning. If necessary, use a slightly damp cloth and ensure the module is completely dry before reconnecting power.
Does this charger require a special installation?
Yes, it requires installation into a compatible Soho Lighting Euro Module faceplate or floor box. Ensure power is disconnected before installation.
Troubleshooting
Device not charging or charging slowly
Ensure the USB cable is fully inserted into the port and the device. Check if the device supports USB PD or fast charging for optimal speed. If charging two devices, note that the total 45W is divided. Try using only one port to see if performance improves.
Charger not recognized by device
Verify the device is compatible with USB-A or USB-C charging standards. Try a different, known-working USB cable. Ensure the charger is properly seated within its compatible Soho Lighting faceplate.
Module does not fit into faceplate
Confirm that you are using a compatible Soho Lighting Euro Module EM plate. This module is not designed for RM, CM, or LT series plates. Double-check the module and plate are the correct types.
Pros and Cons
Pros
- Provides rapid charging for multiple devices simultaneously.
- Offers both USB-A and USB-C connectivity.
- Modern, clean aesthetic in a silk white finish.
- Allows for customisation of wall plates with other modules.
- Supports USB Power Delivery for efficient charging.
Cons
- Total power is divided when both ports are active.
- Strict compatibility limited to specific Euro Module plates (EM type only).
- Requires a compatible Soho Lighting plate system for installation.
- No built-in surge protection mentioned.
Setup, Compatibility & Care
Setup: This charger is designed as a module within The Soho Lighting Company's Euro Module (EM) system. It requires a compatible EM Faceplate or Floor Box to be installed. Ensure the power source is switched off before installation. The module simply clicks into the designated aperture within the faceplate.
Compatibility: This module is *only* compatible with Euro Module EM Floor and Wall Plates from The Soho Lighting Company. It is not compatible with RM, CM, (RM+CM), LT1, LT2, or LT3 plates. Always verify your existing or intended plate system before purchase.
Care: To clean the charger, use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, but ensure the unit is completely dry before restoring power. Avoid using abrasive cleaners or solvents.