Draper Gravity Feed Air Spray Gun - 500ml - 92971
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for users of the Draper Gravity Feed Air Spray Gun (92971), a lightweight and versatile tool ideal for both professionals and DIY enthusiasts. The gun's primary benefit is its ability to deliver an even and efficient paint application across various surfaces. However, users should note that achieving optimal results requires careful adjustment of the fan and flow settings.
All features
| Model Part Number | 92971 |
|---|---|
| Brand | Draper |
Extended Product Information
FAQs
What type of paint can I use with this spray gun?
This spray gun is suitable for use with all paint types, including water-based paints.
What air pressure should I use?
The maximum operating pressure is 60psi (4.1 bar).
How do I clean the spray gun?
Disassemble the gun after each use and clean all parts with the appropriate solvent for your paint type. Pay special attention to the nozzle and air passages.
What is the nozzle size?
The nozzle size is 1.5mm.
What is the air consumption?
The air consumption is 14 cfm.
What type of airline connector does it use?
It uses a 1/4" BSP airline connector.
What is the capacity of the paint cup?
The paint cup has a capacity of 500ml.
How do I adjust the fan pattern?
Adjust the variable fan position to achieve the desired spray pattern.
Troubleshooting
Paint is sputtering or uneven.
Check the paint viscosity and thin if necessary. Clean the nozzle and air passages to remove any obstructions. Adjust the airflow and fan settings.
Poor paint transfer efficiency or excessive overspray.
Adjust the fan pattern and paint flow. Ensure the correct air pressure is being supplied to the gun. Check the distance between the gun and the surface.
Air leaks from the connections.
Check all connections for tightness. Ensure the airline connector is properly sealed. Replace any worn or damaged seals or connectors.
Pros and Cons
Pros
- Lightweight design enhances user comfort.
- Suitable for a wide range of paint types, including water-based.
- Adjustable settings provide precise control over paint application.
- Efficient paint transfer minimizes waste and bounce back.
- Standard airline connector ensures broad compatibility.
Cons
- Requires proper setup and adjustment for optimal performance.
- May require practice to achieve desired results.
- Air consumption of 14 cfm may require a compressor with sufficient capacity.
Setup, Compatibility & Care
- Connecting to Air Supply: Connect the 1/4" BSP airline connector to your air compressor hose. Ensure the connection is secure to prevent air leaks.
- Paint Preparation: Properly thin your paint according to the manufacturer's instructions. Strain the paint to remove any particles that could clog the nozzle.
- Adjusting Settings: Use the adjustable controls to set the fan pattern and paint flow rate. Start with a low flow and gradually increase it until the desired coverage is achieved.
- Cleaning: After each use, thoroughly clean the spray gun. Disassemble the gun and clean each component with the appropriate solvent for your paint type. Pay special attention to the nozzle and air passages to remove any dried paint.
Compatibility: This spray gun is compatible with all paint types, including water-based paints. It requires an air compressor with a minimum output of 14 cfm at a maximum operating pressure of 60psi (4.1 bar).
Care: Regularly clean the spray gun to prevent clogging and ensure optimal performance. Store the gun in a clean, dry place when not in use. Lubricate moving parts as needed to maintain smooth operation.