Axminster Workshop Optical Centre Punch
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Axminster Workshop Optical Centre Punch is designed for woodworkers and metalworkers who need precise marking. It provides accurate punch locations, eliminating guesswork and improving the accuracy of your work. Note that while easy to use, it requires a steady hand for optimal results. This guide will walk you through the features, use, and care of your new punch, ensuring you get the most out of it.
All features
| Model Part Number | 100244 |
|---|---|
| Brand | Axminster Workshop |
Extended Product Information
FAQs
What is the diameter of the base?
The base has a diameter of 48mm.
What are the dimensions of the punches and rods?
The punches and rods are 9.5mm in diameter.
What materials can I use this punch on?
The Axminster Workshop Optical Centre Punch can be used on both wood and metal.
How do I use the punch?
Align the appropriate Perspex rod (crosshair or bullseye) with your mark. Once aligned, hold the base firmly and swap the rod for the punch. Tap the punch lightly with a hammer.
What is the weight of the punch?
The weight is 0.9259415004 pounds.
What if the punch does not make a deep enough mark?
Adjust the force of your hammer tap. Make sure the punch is perpendicular to the surface.
How do I store the punch?
Store the punch in a dry place to prevent rust and damage.
Troubleshooting
Punch mark is off-center.
Ensure the Perspex rod is precisely aligned with the mark before punching. Practice alignment on scrap material to improve accuracy.
Punch tip is dull or damaged.
The punch tips can be re-sharpened or replaced if necessary. Contact Axminster Workshop for replacements.
Perspex rod is difficult to see through.
Clean the Perspex rod with a soft, lint-free cloth. Inspect for scratches and replace if necessary.
Pros and Cons
Pros
- Provides extremely accurate punch locations.
- Eliminates the need for measuring and guesswork.
- Durable materials for long-lasting use.
- Easy to use with practice.
- Versatile with two included punch angles.
Cons
- Requires a steady hand for precise alignment.
- The Perspex rods could be susceptible to scratches.
- May not be suitable for very small or delicate work without practice.
Setup, Compatibility & Care
Setup is straightforward. No assembly is required. Simply unpack the punch, select the appropriate Perspex rod, and get started.
Compatibility: The Axminster Workshop Optical Centre Punch is suitable for use on wood and metal surfaces.
Care:
- Keep the punches and Perspex rods clean and free of debris.
- Store the punch in a dry place to prevent rust.
- Avoid dropping the punch, as this could damage the tip of the punches.
- Clean the Perspex rods with a soft cloth to avoid scratching.