Sandtex Masonry Paint - Microseal Smooth - A durable and breathable exterior masonry paint that offers up to 15 years of weatherproof protection. This paint provides a durable, breathable finish that safeguards walls from mould and algae growth over an extended period. Its microporous nature provides excellent water resistance while allowing the surface to breathe. Dirt resistant, maintaining a fresh appearance for longer. Fast drying formula, rainproof within 1 hour. Trusted durability for 15 years. Breathable, microporous finish. Available in a variety of colours. Also offered in a 150ml tester pot size for home colour testing. Recommended for Rendering, Roughcast, Pebbledash, Concrete, Building Blocks, Emulsion or Masonry Painted Surfaces. Water-Based. Coverage up to 16m² per litre. Drying Time: Rainproof in 1 hour and touch dry in 3-4 hours. Re-Coat Time: 3-4 hours. Recommended Coats: 2 coats. Application Method: Brush, roller or sprayer. Clean Up: Wash equipment with clean, cold water. Preparation: Before painting, ensure all surfaces are in good condition and ready to receive paint. New surfaces require little preparation but must be fully dry. Eliminate any fungal or mould growth using Sandtex Trade Fungicidal Wash, then rinse thoroughly. Remove loose or flaking materials with a stiff bristle brush or scraper. Treat chalky or porous surfaces with Sandtex Stabilising Solution to enhance adhesion. Fill gaps or cracks with Sandtex Ready Mixed Filler. Application: Always conduct a test patch to confirm desired results before full application. Proper surface preparation is crucial. Avoid painting when rain, frost, or temperatures below 8°C are expected during application and drying. Stir paint thoroughly before use and apply using a brush, exterior roller, or airless sprayer. Apply 2 coats, allowing 3-4 hours between coats. Refer to the manufacturer's instructions provided on the container.