Blum 970.1002 Cabinet Soft Close Pistons - 10 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This 10-pack of Blum 970.1002 soft close pistons is designed for DIY enthusiasts and homeowners looking to add a touch of modern convenience to their existing kitchen and wardrobe cabinets. The key benefit is achieving a smooth, quiet closing action for doors, preventing slams and potential damage. A potential caveat is that installation requires either a pre-drilled hole or the use of an additional adapter plate, which is not included. These genuine Blum components provide reliable retro-fit soft-close functionality.
All features
| Model Part Number | 970.1002 |
|---|---|
| Brand | Blum |
Extended Product Information
FAQs
What is the primary benefit of using these soft close pistons?
The primary benefit is preventing cabinet and wardrobe doors from slamming shut, which reduces noise and protects the doors and frames from wear and tear.
Do I need an adapter plate to install these pistons?
Not necessarily. You can insert the piston directly into the cabinet frame if you drill a 10mm x 50mm hole. An adapter plate (sold separately) can be used as an alternative mounting method.
Are these pistons suitable for all types of cabinets?
These pistons are designed for retro-fitting to cabinet and wardrobe doors, primarily for the handle side. Their effectiveness depends on the door's weight and how well they are installed.
How many doors can I outfit with this 10-pack?
This pack contains 10 pistons, which is typically enough to outfit multiple doors, depending on how many doors you wish to have soft-close functionality on. For a standard kitchen base cabinet, one piston per door is usually sufficient.
What tools are required for installation?
You will need a drill with a 10mm drill bit for creating the installation hole, a screwdriver or drill bit for any screws required by the fittings, and potentially measuring tape and a pencil for marking.
Can I install these on the hinge side of the door?
No, these specific Blum 970.1002 pistons are designed for installation on the handle side of the cabinet door.
Troubleshooting
Door does not close softly.
Ensure the piston is correctly aligned with the door and engaging properly. Check that the piston is fully inserted or securely mounted. Verify that the door is not too heavy for the piston's damping capacity.
Piston is difficult to install.
Confirm the drilled hole is the correct size (10mm diameter, 50mm deep). Ensure there are no obstructions within the hole. If using an adapter plate, ensure it is compatible and securely attached.
Door slams shut intermittently.
Check for any binding or resistance in the cabinet door hinges. Ensure the piston is not obstructed and can move freely. The door might require slight adjustment or the piston may need replacement if damaged.
Piston makes noise.
A slight 'hiss' is normal as the piston engages. Excessive or grinding noises could indicate an obstruction or damage to the piston mechanism. Inspect for foreign objects or misalignment.
Pros and Cons
Pros
- Enhances user experience by eliminating door slamming.
- Extends the lifespan of cabinets by reducing stress on hinges and frames.
- Easy to install on existing cabinetry, no complex modifications needed.
- High-quality components from a reputable brand (Blum).
- Cost-effective way to upgrade cabinet functionality.
Cons
- Requires a 10mm x 50mm hole for direct insertion or an additional adapter plate (not supplied).
- Only suitable for the handle side of the cabinet door.
- May require minor adjustments for perfect alignment on all door types.
- Effectiveness can vary based on door weight and hinge type.
Setup, Compatibility & Care Instructions
Setup:
- Determine Mounting Location: Decide whether to insert the piston directly into the cabinet frame or use an adapter plate (adapter plate not included).
- Prepare the Hole: If inserting directly, drill a 10mm diameter hole, 50mm deep, into the cabinet frame on the handle side.
- Attach Fittings: Secure the included fittings to the piston and the corresponding point on the cabinet door.
- Insert Piston: Carefully insert the piston into the prepared hole or attach it to the adapter plate.
- Adjust and Test: Ensure the piston engages correctly with the door and provides a smooth closing action. Minor adjustments may be needed.
Compatibility:
- These pistons are designed for the handle side of cabinet and wardrobe doors.
- Suitable for use in kitchen cabinets, wardrobes, and similar furniture.
- Requires a cabinet frame depth sufficient for the piston and installation.
Care:
- Wipe clean with a soft, damp cloth. Avoid abrasive cleaners or solvents.
- Periodically check that fittings remain secure.
- Ensure the installation area remains free from excessive dust or debris that could impede function.