Osmo Liquid Wax Cleaner - 1L Clear 3029
Not Available
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Osmo Liquid Wax Cleaner is designed for owners of wooden flooring, furniture, and other interior wood surfaces previously treated with oil or wax finishes. Its key benefit is refreshing and protecting wood while effectively removing tough stains like grease and shoe polish, using natural hard waxes. A potential caveat is that it requires proper application techniques to avoid streaks and achieve the desired finish, particularly on larger areas.
All features
| Model Part Number | 3029 |
|---|---|
| Brand | Osmo |
Extended Product Information
FAQs
Can I use Osmo Liquid Wax Cleaner on my newly oiled floor?
No, Osmo Liquid Wax Cleaner is intended for refreshing and cleaning wood surfaces that have already been treated with oil or wax. It is not a primary finishing product.
How often should I use Osmo Liquid Wax Cleaner?
Use is dependent on wear and tear. For most floors and furniture, occasional refreshing is sufficient, perhaps every 6-12 months or when the surface appears dull or stained. For high-traffic areas, more frequent use might be beneficial.
What is the difference between Osmo Liquid Wax Cleaner and Osmo Wash and Care?
Osmo Liquid Wax Cleaner is a care product designed to refresh and protect oiled/waxed surfaces and remove tough stains using natural waxes. Osmo Wash and Care is a milder cleaning agent for routine maintenance of oiled/waxed surfaces.
Can I use this on a waxed table?
Yes, Osmo Liquid Wax Cleaner is suitable for furniture and other oiled and waxed indoor wood surfaces, including tables.
Do I need to reapply a top coat after using this product?
No, Osmo Liquid Wax Cleaner replenishes the hard wax content within the wood and does not require a separate top coat. It provides protection on its own.
How much product do I need for my room?
The general guideline is approximately 2 teaspoons per square meter. A 1L can will cover a significant area, depending on the application method and surface porosity.
Troubleshooting
Streaks appear after application
Ensure the product is spread thinly and evenly. If using a machine, try turning the pad over or using a fresh pad. Allow to dry fully before polishing.
Product does not remove a stubborn stain
Apply a slightly more concentrated amount directly to the stain and gently rub with a cloth or a Scotch pad. Allow it to work for a short period before buffing.
Surface appears dull after drying
The surface may require polishing to achieve a higher sheen. Use a clean cloth or polishing machine on the dried surface.
Product leaves a residue
Too much product may have been used. Ensure only the recommended amount (approx. 2 teaspoons per m²) is applied and spread thinly. Buff any excess.
Pros and Cons
Pros
- Effectively removes tough stains and dirt.
- Restores and protects oiled/waxed wood surfaces.
- Leaves a natural, non-film finish.
- Suitable for various interior wood applications.
- Uses natural hard waxes for added durability.
Cons
- Requires careful application to avoid streaks.
- Best results achieved with specific application tools (e.g., Osmo Active Fibre Cloth).
- Not suitable for unsealed or untreated wood.
- May require polishing for a high-gloss finish.
Setup, Compatibility & Care Instructions
Compatibility:
- Osmo Liquid Wax Cleaner is specifically designed for interior wood surfaces that have been previously treated with oil or wax finishes, such as Osmo Polyx®-Oil.
- It is not recommended for unsealed, lacquered, or painted wood surfaces.
Application (Manual):
- Ensure the wood surface is clean and dry.
- Apply approximately 2 teaspoons of Osmo Liquid Wax Cleaner per square meter using an Osmo Active Fibre Cloth.
- For tough stains, rub directly onto the stain with the cloth or a Scotch pad.
- Evenly spread the cleaner across the surface.
- Allow the surface to dry completely.
- For a high-gloss finish, polish the dried surface.
Application (Machine):
- Apply Osmo Liquid Wax Cleaner with a single-disc machine and a white pad, using approximately 2 teaspoons per square meter.
- Spread the cleaner evenly and rub it into the surface.
- If streaks appear, turn the pad over or use a new pad.
- Allow the surface to dry.
- Polish the dried surface for a high-gloss finish.
Care:
- Store the product in a cool, dry place, away from direct sunlight.
- Keep the container tightly closed when not in use.
- Regular dusting and occasional cleaning with appropriate wood care products will maintain the finish.