Gorilla Contact Adhesive Clear - 75g - 12 Pack
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Gorilla Contact Adhesive Clear is designed for DIY enthusiasts, crafters, and professionals who require a high-strength, permanent bond across diverse materials like rubber, wood, and metal. The primary benefit is its fast-setting, transparent formula that leaves an unobtrusive finish, making it perfect for visible repairs and upholstery; however, users should be aware that it requires careful alignment, as the instant grip does not allow for repositioning once surfaces touch.
All features
| Brand | Gorilla |
|---|
Extended Product Information
FAQs
Can I reposition the parts once they touch?
No, Gorilla Contact Adhesive Clear provides an instant grip, so you must align your pieces carefully before they make contact.
Is this adhesive safe for food-contact surfaces?
No, this product is not intended for use on items that will come into contact with food or beverages.
Does it work on polyethylene or polypropylene plastics?
Generally, contact adhesives do not bond well to these types of low-energy plastics.
How long does it take to reach full strength?
While the bond is instant upon contact, it typically reaches its full structural cure within 24 hours.
Can I use this for outdoor projects?
Yes, it is waterproof and suitable for outdoor use, provided the bond is made in dry conditions.
Do I need to clamp the items?
No, firm manual pressure is usually sufficient due to the nature of contact adhesives.
Troubleshooting
Bond is not holding after application
Ensure that both surfaces were coated and allowed to become tacky before joining; re-apply if the glue dried out or was not applied to both sides.
Excess glue remains visible
Use a suitable solvent to carefully clean away excess adhesive before it fully cures, or scrape gently with a plastic tool once cured.
Adhesive dried in the tube
Ensure the cap is tightly secured after every use and store in a cool, climate-controlled environment.
Pros and Cons
Pros
- Dries completely clear for clean results
- Excellent adhesion on difficult materials like rubber and leather
- Highly resistant to water and environmental moisture
- Fast-setting for efficient project completion
- Bulk pack provides long-term supply and value
Cons
- Instant grip means no room for alignment errors
- Strong odor requires use in well-ventilated areas
- Not intended for structural load-bearing applications
- Requires coating both surfaces for optimal performance
Setup, Compatibility & Care
To achieve the best results, ensure your workspace is well-ventilated due to the chemical nature of the adhesive. First, clean both surfaces to be joined to remove debris. Apply a thin, even layer of adhesive to both surfaces using a brush or a spreader. Wait for approximately 5 to 10 minutes until the adhesive feels tacky but does not transfer to your finger. Align your parts precisely, as the bond will be permanent upon contact. Press firmly for several seconds. Store the tubes in a cool, dry place with the cap tightly sealed to prevent the adhesive from drying out inside the tube. If stored properly, the remaining tubes in the 12-pack will maintain their efficacy for extended periods.