Liberon Iron Paste - 1 Litre
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Liberon Iron Paste is a protective and decorative black graphite paste designed for cast and wrought ironwork, offering a non-flaking finish suitable for home decorating. Its key benefit is preventing rust while providing a durable, buffable sheen, especially ideal for ornamental ironwork, fire surrounds, and grates. A caveat to consider is its minimum 4-hour drying time.
All features
| Model Part Number | LIBIP1L |
|---|---|
| Brand | Liberon |
Extended Product Information
FAQs
How do I prepare the iron surface before applying Liberon Iron Paste?
The iron surface must be clean, dry, and free from rust, grease, and old paint. Lightly abrading heavily rusted areas will improve adhesion and finish.
What is the recommended drying time for Liberon Iron Paste?
Liberon Iron Paste requires a minimum drying time of 4 hours. It is advisable to ensure good ventilation during this period.
Can Liberon Iron Paste be used on cast iron radiators?
While it provides protection and a decorative finish, it is not designed for high-temperature continuous use like radiators. It is best suited for decorative ironwork and fireplace surrounds.
How can I achieve a high shine on the treated ironwork?
Once the paste has dried completely (minimum 4 hours), buff the surface vigorously with a soft, clean cloth. Multiple layers with buffing in between can enhance the sheen.
Does this product prevent rust effectively?
Yes, Liberon Iron Paste is specifically formulated to protect ironwork and reduce the possibility of rusting by forming a durable coating.
What is the coverage rate for a 1-litre tin?
Coverage varies depending on the surface porosity and application thickness, but typically a 1-litre tin can cover a significant area of ornamental ironwork or several smaller items.
Is Liberon Iron Paste suitable for outdoor use?
Yes, it provides protection against rust, making it suitable for outdoor ornamental ironwork. However, in very exposed or damp conditions, reapplication may be needed over time.
Troubleshooting
Paste is difficult to spread evenly.
Ensure the paste is at room temperature. If it's too stiff, gently warm the container (do not overheat) or add a few drops of Liberon specific thinner if available and recommended by the manufacturer.
Finish appears streaky or uneven after buffing.
Apply thinner coats of paste and ensure thorough buffing. Allow adequate drying time between coats and before final buffing.
Surface still shows signs of rust.
The iron surface may not have been adequately prepared. Remove all existing rust before application. Ensure the paste was applied evenly and thinly over the entire affected area.
Paste remains tacky after 4 hours.
Ensure the application was thin and even. High humidity or insufficient ventilation can prolong drying time. Allow for longer drying in such conditions.
Pros and Cons
Pros
- Effectively prevents rust and corrosion.
- Leaves a smooth, non-flaking, attractive black finish.
- Bonds securely to the iron surface for long-lasting protection.
- Can be buffed to a high sheen for an enhanced look.
- Ideal for restoring the appearance of antique or decorative ironwork.
Cons
- Requires a minimum of 4 hours to dry.
- Application can be messy if not handled carefully.
- May require multiple thin coats for optimal results.
- Not suitable for high-temperature applications beyond decorative fireplaces.
Setup, Compatibility & Care
Setup:
- Ensure the iron surface is clean, dry, and free from rust, grease, or old paint. Lightly abrade heavily rusted areas if necessary.
- Apply a thin, even coat of Liberon Iron Paste using a soft cloth or brush.
- Allow to dry for a minimum of 4 hours. Ensure good ventilation during drying.
- Once dry, buff the surface with a soft cloth to achieve a uniform sheen.
Compatibility:
- Primarily designed for cast iron and wrought iron.
- Suitable for ornamental ironwork, grates, fire irons, and fireplace surrounds.
- Not recommended for surfaces exposed to extreme heat or direct flame.
Care:
- Clean with a soft, dry cloth. Avoid abrasive cleaners or excessive moisture.
- Reapplication may be necessary over time, especially in damp environments, following the same application steps.