MENNEKES Industrial Connector Plug - CEE 32A 3P IP54 Blue 230V
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
This guide is for professionals in industrial settings who require a reliable and robust power connection. The MENNEKES Industrial Connector Plug offers a secure and protected 32-amp, 3-pole connection for 230V systems, featuring IP54 rating for dust and moisture resistance. A key benefit is its PTXR technology for enhanced durability, though it requires specific CEE industrial power distribution systems for compatibility.
All features
| Model Part Number | 14513 |
|---|---|
| Brand | Mennekes |
Extended Product Information
FAQs
What does IP54 rating mean?
IP54 indicates that the connector is protected against dust ingress (limited protection) and splashes of water from any direction.
Can this plug be used with 110V systems?
No, this plug is specifically designed for 230V systems according to EN 60309-2 standards.
What is the '6H' time setting?
The '6H' refers to the position of the earth pin relative to the phase pins, indicating a specific time setting (6 o'clock) for safe connection in 230V systems. The blue color also signifies 230V.
How do I ensure a secure connection?
Ensure wires are stripped to the correct length and firmly secured within the screw terminals. Tighten the cable clamp to prevent strain on the connections.
What material are the contacts made of?
The contacts are made of CuSn (copper-tin alloy).
Is this plug suitable for outdoor permanent installation?
While it has IP54 protection, it is primarily designed as a connector plug for portable or temporary connections in industrial settings. For permanent outdoor installations, other specific outdoor-rated electrical enclosures and connectors may be more suitable.
Troubleshooting
Connector not powering equipment
Verify that the power source is active and correctly wired to 230V. Ensure the plug is securely seated in its receptacle and that all wires are firmly connected to the screw terminals. Check the circuit breaker or fuse for the power source.
Loose connection
Tighten the screw terminals inside the connector. Ensure the cable clamp is securely fastened to prevent strain on the wire connections.
Reduced performance or intermittent power
Inspect the contacts for dirt, dust, or corrosion. Clean gently with a soft, dry cloth. Ensure the cable entry is sealed correctly to maintain IP54 integrity.
Pros and Cons
Pros
- High durability for industrial environments due to IP54 rating and PTXR technology.
- Secure and reliable connection via screw terminals.
- Ergonomic design enhances user safety and ease of use.
- Standard blue color coding for 230V connections aids in quick identification.
- Compatible with standard CEE industrial power distribution systems.
Cons
- Requires a specific 230V 6H system; not universally compatible with all voltage standards.
- UL/CSA current rating is 30A, lower than the IEC 32A rating.
- Surface treatment of contacts is untreated, potentially requiring careful handling to prevent oxidation.
- Not suitable for environments with high-pressure water jets or complete immersion.
Setup, Compatibility & Care
Setup: Connect the appropriate gauge wires to the screw terminals inside the connector plug. Ensure the cable entry is properly secured to maintain the IP54 rating. Refer to the EN 60309-2 standard for correct wiring practices for 230V, 6-hour systems.
Compatibility: This plug is designed for 230V (50+60 Hz) systems with a time setting of 6h (blue color code). It is compatible with standard CEE industrial power distribution systems. Ensure your existing power infrastructure matches these specifications.
Care: Keep the plug clean and free from debris. Use a dry or slightly damp cloth for cleaning; avoid abrasive cleaners or solvents. Periodically inspect the contacts and terminals for any signs of damage or corrosion. Store in a dry location when not in use.