NORGREN Electrical Plug - 0570275
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The Norgren 0570275 Electrical Plug with Cable Gland is designed for professionals using Norgren spool valves. Its key benefit is providing a secure and protected electrical connection for industrial applications, offering voltage ratings up to 250V AC/300V DC and integrated surge suppression. A potential caveat is its specific 'Form A' configuration, which requires compatibility with existing systems.
All features
| Model Part Number | 0570275 |
|---|---|
| Brand | NORGREN |
Extended Product Information
FAQs
What is the 'Form A' configuration?
'Form A' refers to a specific standard for the shape and pin arrangement of electrical connectors, common in industrial automation.
What does IP65 protection class mean?
IP65 means the enclosure is protected against dust ingress and protected against low-pressure water jets from any direction. It's suitable for many industrial environments.
Can this plug be used for higher voltages?
No, this plug is rated for a maximum of 250V AC and 300V DC. Exceeding these ratings can cause damage or failure.
What is the purpose of surge suppression?
Surge suppression protects electrical components from sudden, brief increases in voltage (surges) that can occur in power lines, preventing damage and prolonging the life of the equipment.
Does this product come with a cable?
The product is an electrical plug with a cable gland, intended for the user to attach their own cable. It does not typically come with a pre-attached cable.
How do I connect wires to the plug?
The plug has internal terminals conforming to DIN EN 175301-803 standards for electrical connection. Consult the product manual or a qualified electrician for correct wiring procedures.
Troubleshooting
No power to the spool valve
Verify that the plug is securely connected to the valve and the power source. Check wiring connections within the plug and ensure the voltage rating matches the supply. Test the power source independently.
Intermittent operation or signal loss
Inspect the plug and cable for any signs of damage. Ensure the cable gland is tightened correctly to maintain the IP65 seal. Check for loose internal wiring connections within the plug.
Surge protection failure indicator (if applicable)
If your system has an indicator for surge protection, and it shows a fault, the surge suppression component may need replacement. Consult Norgren documentation or support.
Poor sealing or water ingress
Re-tighten the cable gland and ensure the mating connector is properly seated. Inspect seals for damage and replace if necessary to maintain IP65 rating.
Pros and Cons
Pros
- Robust IP65 protection class for harsh environments.
- Includes surge suppression for enhanced component longevity.
- Standardized 'Form A' and DIN EN 175301-803 compliance ensures wide compatibility.
- Suitable for various Norgren spool valve applications.
Cons
- Specific 'Form A' configuration may limit compatibility with non-standard systems.
- Not suitable for applications requiring higher voltage ratings than specified.
- Hose O/D and Thread specifications are not applicable for this electrical component.
Setup, Compatibility & Care
Setup:
- Ensure the power source is disconnected before installation.
- Connect the appropriate wiring to the terminals within the plug, following the DIN EN 175301-803 standard.
- Secure the cable gland to maintain the IP65 protection rating.
- Connect the plug to the corresponding receptacle on the Norgren spool valve.
Compatibility:
- Primarily designed for use with Norgren spool valves.
- Compatible with electrical systems requiring a 'Form A' IEC connector.
- Voltage compatibility: Up to 250V AC / 300V DC.
- Ensure the electrical connection standard (DIN EN 175301-803) matches your system requirements.
Care:
- Periodically inspect the plug and its connection for any signs of damage or wear.
- Keep the connector clean and free from excessive dust or debris that could compromise the IP65 seal.
- Avoid exposing the plug to chemicals or solvents not rated for its material.
- Ensure the cable gland remains tight to maintain water and dust protection.