AiM Motorsport V-Type Roll Bar Bracket - SmartyCam GP HD
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
The AiM Motorsport V-Type Roll Bar Bracket is an essential accessory for racing drivers and track enthusiasts who need a reliable, rock-solid mounting solution for the remote bullet camera of the SmartyCam 3 GP system. Designed for precision and stability, this bracket ensures your camera remains vibration-free during high-G maneuvers, though it is exclusively tailored for the remote bullet camera unit and will not fit the standard SmartyCam 3 HD integrated body.
All features
| Model Part Number | SM-VB-GP |
|---|---|
| Brand | AIM |
Extended Product Information
FAQs
Does this bracket fit the SmartyCam 3 HD (non-GP)?
No, this specific bracket is designed only for the remote bullet camera unit of the SmartyCam 3 GP.
Can I mount this on a square tube roll cage?
The bracket is optimized for cylindrical roll bars. Mounting on square tubing may result in an unstable connection.
What tools are needed for installation?
You will generally need a standard set of hex keys (Allen wrenches) to adjust the clamp tension and the ball joint locking screw.
Is the bracket vibration-proof?
While it is designed for racing stability, all mounts require firm tightening to mitigate high-frequency vibration common in race engines.
Can I adjust the angle while the camera is attached?
Yes, you can loosen the locking screw slightly to reposition the camera, but ensure you re-tighten it fully before taking the vehicle on track.
Troubleshooting
Camera angle shifts during track use
Ensure the ball-and-socket locking mechanism is fully tightened. If it still shifts, clean the ball surface to ensure there is no residual lubricant or debris causing slippage.
Clamp does not grip the roll bar tightly
Verify the diameter of your roll bar. If it is significantly smaller than the clamp's minimum range, you may need to use a high-density rubber spacer to ensure a secure, friction-heavy fit.
Pros and Cons
Pros
- Precision-engineered for the SmartyCam 3 GP bullet camera
- High-degree of adjustability for optimal viewing angles
- Heavy-duty construction ensures stability on track
- Compatible with various roll bar diameters
Cons
- Not compatible with the standard SmartyCam 3 HD housing
- Requires proper tightening to prevent creeping under extreme vibration
- Limited to roll bar mounting surfaces
Setup, Compatibility & Care
To install, identify a mounting point on your roll cage that provides a clear field of view and allows for safe cable routing for your camera's data harness. Ensure the clamp is positioned on a straight section of the roll bar for maximum contact.
Compatibility Note: This bracket is strictly for the SmartyCam 3 GP remote bullet camera. Do not attempt to force the standard SmartyCam 3 HD into this mount as the dimensions will not align.
Care Instructions: After a weekend at the track, check the bolt tension on the clamp. Periodically clean the ball-and-socket joint with a dry cloth to ensure no grit or metallic dust interferes with the locking movement. If the bracket is exposed to moisture or extreme heat cycles, inspect the hardware for signs of oxidation or wear.