Feather Wallpaper Roll - Beige

A feather-themed wallpaper design with a smooth finish and metallic highlights. This high-quality ...

Currently unavailable

Currently out of stock

This product is not available at the moment. Check back later or explore other options below.

Product Information

Full details

This Belgravia Decor feather-themed wallpaper is ideal for homeowners looking to add a touch of elegance and texture to their living spaces, offering a smooth finish with subtle metallic highlights for a sophisticated look. While it's easy to apply, the 53cm offset pattern match requires careful alignment to achieve a seamless design. Key features include its high-quality material, generous roll size (10.05m x 53cm), and suitability for main living areas.

All features

ColourBeige
Model Part Number775
BrandBelgravia Decor

Extended Product Information

FAQs

What is the pattern repeat for this wallpaper?

The wallpaper has a 53cm pattern repeat with a 26.5cm offset pattern match.

How do I clean this wallpaper?

You can clean the wallpaper gently with a slightly damp cloth. Avoid using abrasive cleaners.

What type of application method is used?

This is a 'paste the paper' wallpaper, meaning you apply the adhesive directly to the back of the wallpaper strips.

What are the dimensions of the wallpaper roll?

Each roll measures 10.05 meters in length and 53 centimeters in width.

What rooms is this wallpaper best suited for?

It is ideal for living rooms, dining areas, bedrooms, and entryways. It is not recommended for high-moisture areas.

How do I achieve a seamless look with the offset pattern match?

Carefully align the pattern elements of each strip, paying attention to the 26.5cm offset, ensuring continuous flow of the feather design across the wall.

Troubleshooting

Bubbles or creases appear after application

Gently lift the affected section of wallpaper and re-smooth it using a wallpaper brush or smoother, working from the center outwards to push out trapped air.

Pattern does not align correctly

Ensure you are following the 26.5cm offset pattern match. Temporarily unstick the strip and reposition it carefully, aligning the pattern elements before smoothing.

Wallpaper is not sticking to the wall

Check if the correct type of wallpaper adhesive has been used and applied liberally. Ensure the wall surface is properly prepared and not too porous. Reapply adhesive if necessary.

Tears during application

Handle the wallpaper carefully, especially when wet. Use a sharp knife for trimming. If a tear occurs, assess if it can be hidden within the pattern or if a new strip is needed.

Pros and Cons

Pros

  • Elegant and sophisticated feather design.
  • Subtle metallic highlights add a premium feel.
  • Smooth finish is easy to maintain.
  • Large roll size offers good coverage.
  • Paste the paper application is user-friendly for DIYers.

Cons

  • Offset pattern match requires careful alignment.
  • May not be suitable for high-moisture areas like bathrooms.
  • Metallic highlights might be too subtle for some preferences.

Setup, Compatibility & Care Instructions

Setup:

  1. Ensure the wall surface is clean, dry, and free from old wallpaper or loose paint. Prime the wall if necessary.
  2. Cut wallpaper strips to the required length, allowing extra for trimming at the ceiling and skirting board.
  3. Apply wallpaper adhesive evenly to the back of each strip using a paste brush or roller. Allow the paste to 'relax' for the recommended time (usually a few minutes) as per the adhesive instructions.
  4. Hang the first strip, ensuring it is perfectly vertical using a spirit level. Align subsequent strips edge-to-edge, paying close attention to the 26.5cm offset pattern match to ensure the feather design flows seamlessly.
  5. Smooth each strip onto the wall using a wallpaper brush or smoother, working from the center outwards to remove air bubbles.
  6. Trim excess wallpaper at the ceiling and skirting board with a sharp knife.

Compatibility:

This wallpaper is best suited for dry interior living spaces such as living rooms, dining rooms, bedrooms, and hallways. It is not recommended for high-moisture environments like bathrooms or kitchens.

Care:

The smooth finish allows for easy maintenance. Clean gently with a slightly damp cloth. Avoid harsh chemicals or abrasive cleaners that could damage the metallic highlights or surface texture.