Barrettine Teak Oil - 250Ml
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later or explore other options below.
Product Information
Full details
Barrettine Teak Oil is designed for the treatment and enhancement of unsealed hardwood, providing a natural, water-resistant finish ideal for garden furniture and indoor pieces requiring a traditional matt look. Its key benefit is nourishing and reviving wood to reduce weathering, though it requires regular reapplication for outdoor use and is not suitable for oak furniture or flooring.
All features
| Model Part Number | OITE.25 |
|---|---|
| Brand | Barrettine |
Extended Product Information
FAQs
What types of wood can I use Barrettine Teak Oil on?
It is designed for untreated hardwood. It's ideal for general garden furniture and traditional indoor furniture, but it is not suitable for Oak furniture or flooring.
How often should I reapply Teak Oil outdoors?
For outdoor use, very regular retreatment will be required. Depending on weather exposure, this may mean reapplying seasonally or more often to maintain the finish and water resistance.
What is the drying time for Barrettine Teak Oil?
The drying time between coats is 12-24 hours, and a minimum of 1 day is required after the final coat before using the treated item. Full drying typically takes 24-48 hours.
Can I use this on painted or varnished wood?
No, the wood must be unsealed and free from repellant coatings like wax, paint, and varnish. These must be removed and the wood sanded down as required before application.
How do I clean my equipment after use?
Clean brushes and lint-free cloths immediately after use with White Spirit.
What should I do with the cloths after oiling?
Cloths used for oiling can spontaneously combust. Immediately after use, soak them in soapy water, then lay them flat outside on a non-combustible surface to dry completely before disposal.
What coverage can I expect from a 250ml tin?
A 250ml tin should cover approximately 2 to 2.5 square metres, based on the coverage rate of 8-10 sq metres per litre.
Troubleshooting
Wood remains sticky or greasy after application.
Excess oil was not removed thoroughly. Wipe down the surface with a clean, lint-free cloth. For stubborn areas, a cloth lightly dampened with White Spirit might help, followed by a dry cloth wipe.
Uneven finish or blotchiness.
The wood may have absorbed the oil unevenly. Ensure the surface was prepared correctly, and that any oily woods were wiped with White Spirit. Apply thinner coats and ensure even coverage.
Finish does not appear water-resistant.
Insufficient coats applied or reapplication needed. Ensure at least 2-3 thin coats were applied and allowed to cure. For outdoor use, frequent retreatment is necessary.
Oil has dried too quickly on the surface.
This can happen in warm, dry conditions. Apply the oil in cooler temperatures and ensure excess is removed within the 10-15 minute window.
Pros and Cons
Pros
- Provides a natural, non-glossy finish.
- Offers good water resistance for outdoor items.
- Nourishes and revives old or weathered wood.
- Suitable for a variety of untreated hardwoods.
- Easy to apply with common tools.
Cons
- Requires frequent reapplication for outdoor use.
- Not suitable for oak furniture or flooring.
- Untreated wood must be clean and free from existing coatings.
- Cloths used can pose a spontaneous combustion risk if not handled properly.
Setup, Compatibility & Care
Preparation is essential for optimal results.
- Clean the Wood: Ensure the wood surface is dry, clean, and free from dirt, wax, paint, or varnish. For oily woods, wipe with White Spirit before application.
- Shake Well: Always shake the oil container thoroughly before use.
- Application: Apply 2-3 thin coats using a brush or a lint-free cloth. Allow 12-24 hours of drying time between each coat.
- Remove Excess: After 10-15 minutes of application, wipe away any excess oil with a clean lint-free cloth.
- Drying Time: Allow a minimum of 1 day after the final coat before using the treated item. Full drying time is typically 24-48 hours.
- Equipment Cleaning: Clean brushes and cloths immediately after use with White Spirit.
- Cloth Safety: Crucially, cloths used for oiling may spontaneously combust. Immediately after use, soak them in soapy water and then lay them flat outside on a non-combustible surface to dry fully.
Compatibility: Suitable for untreated hardwood. Not suitable for Oak furniture or flooring.
Outdoor Use: For outdoor applications, a prior wood preservative treatment is recommended. Frequent retreatment is necessary to maintain protection.